Configure The Bri Server Settings; View The Bri Server Log - Honeywell IF1C User Manual

•
•

Configure the BRI Server Settings

Configure the BRI Server to handle communications between your application and
the RFID module.
1. Log in to the web browser interface and click RFID Services > BRI > BRI Server.
2. Configure the BRI Server settings.
3. Click Activate Changes to save your changes.
BRI Server Settings
BRI Server settings handle communications between your application and the
RFID module.
Setting
Enable External BRI
Connections
BRI TCP Port
Enable Logging

View the BRI Server Log

If you enable logging, you can see a list of BRI server events, and save the logfile as
a .txt file.
1. Log in to the web browser interface and enable logging.
2. Click RFID Services > BRI > BRI Log.
IF1C Fixed RFID Reader User Guide
BRI (Basic Reader Interface)
Honeywell proprietary protocol for controlling the reader. For information about
the BRI, see the Basic Reader Interface Programmer Reference Manual
available on the Honeywell website.
LLRP (Low-Level Reader Protocol)
EPCglobal standard for network interfaces between the RFID reader and its
controlling software. The RFID reader supports version 1.0.1 of the EPCglobal
LLRP. For information on LLRP, see go to
rfid/llrp/1-1-0. An open source LLRP Toolkit can be downloaded at
sourceforge.net/projects/llrp-toolkit.
Description
Enables external TCP connections to the BRI server. If this is not enabled,
BRI applications will not be able to connect to the reader.
Specifies the TCP port used for incoming connections to the BRI server.
This port must be unique for all TCP services running on the reader. Valid
range is 2189 to 65535. Default is 2189.
Enables logging of BRI server events.
https://www.gs1.org/standards/epc-
http://
13