Log In To The Web Browser Interface - Honeywell IF1C User Manual

15. To set the IP address, press 1, type in the IP address, and press Enter.
16. To set the subnet mask, press 2, type in the subnet mask, and press Enter.
17. To set the IP router, press 3, type in the IP address, and press Enter.
18. (Optional) To change the Ethernet link speed, press L, and choose the link
19. Press Q to close the Initial Configuration screen.
20. Remove the USB cable from the reader. The reader is ready to be configured

Log In to the Web Browser Interface

After the reader is assigned an IP address, you can configure the reader through
the web browser interface. Before you log in, make sure an IP address has been
assigned to the reader, and the reader is connected to your network.
1. Start a web browser.
2. In the browser address field, enter the IP address, and press Enter.
3. (Optional) For a secure session, click A secure session is available.
IF1C Fixed RFID Reader User Guide
speed.
and connected to your network.
7