Configure Common Network Settings; Common Network Settings - Honeywell IF1C User Manual

Fixed rfid reader
Table of Contents

Advertisement

Setting
Router Default
Link Local IP Address
IPv6 Autoconfigure
IPv6 Address
IPv6 Router

Configure Common Network Settings

You can configure the common network settings that apply to the reader network
interface.
1. Log in to the web browser interface and click Network Configuration >
2. Configure the settings.
3. Click Activate Changes to save your changes.

Common Network Settings

You can configure these common network settings that apply to the reader net-
work interface.
Setting
Hostname
DNS Server 1
DNS Server 2
DNS Suffix 1
DNS Suffix 2
SNTP Server Name 1
10
Common.
Description
The IP address of the router. The IP address has the form x.x.x.x, where x is
a number from 0 to 255.
If DHCP is enabled, the currently assigned router address appears in this
field.
If DHCP is disabled, specify the router address in the entry field.
The IP address of the reader is only routable on the local IP subnet. The
reader auto-negotiates with other devices on its Ethernet segment to
obtain a unique address, so no user configuration of the Link Local IP
Address is necessary. The reader always has a Link Local IP Address,
even if another address is assigned through DHCP or statically via user-
configuration.
Enables IPv6 automatic configuration.
Auto-configuration is enabled by default. If you disable auto-
configuration, you need to specify an IPv6 address, subnet mask, and
router.
128-bit IPv6 address for the reader.
128-bit address for the IPv6 router.
Description
Name for this reader. The default is "IF1<serial number of the reader>".
The host name can be either a simple host name, or a qualified domain
name (FQDN). If this reader obtains its IP address via DHCP, this
parameter is sent to the DHCP server. If the server supports it, this field is
used for dynamic DNS updates.
IP address of a domain name server that the reader uses to resolve DNS
names.
IP address of a second domain name server that the reader uses to
resolve DNS names.
Primary DNS suffix to be appended to unqualified names.
Secondary DNS suffix to be appended to unqualified names.
DNS name or IP address of an SNTP or NTP server.
IF1C Fixed RFID Reader User Guide

Advertisement

Table of Contents
loading

Table of Contents