HP x4000 Technical Reference Manual page 54

System BIOS and Resources
HP Setup Program
Table 4-2
Field
Integrated I/O
Ports
Integrated
Audio
AGP Pro 110
4X Slot
(Graphics)
PCI Device
Slot #
54
This manual downloaded from http://www.manualowl.com
Advanced Menu
Description
Lets you configure both the integrated serial and
parallel ports.
Serial port A, Serial port B, or Parallel Port: These
fields contain three choices.
PnP OS configure the port.
resource. leaves the port disabled by the
Disabled
BIOS, but a PnP OS can still enable it.
Parallel Port Mode: You can set the parallel port
mode to ,
Output only Bi-directional
Lets you configure the integrated PCI audio
controller. These fields are identical to the Integrated
SCSI Controller fields listed above except there is no
Option ROM Scan.
Lets you configure your AGP Pro 110 4X slot. The
first two fields describe the installed graphics card.
The Enable Master and Latency Timer fields are
described in the Integrated SCSI Controller entry
above.
Graphics Aperture: This field contains a pull-down
menu that lets you choose the size of the graphics
aperture for the AGP video device.
Lets you configure a PCI device plugged into the
specified slot. The first two fields describe the
installed PCI card. The next three fields are identical
to the Integrated SCSI Controller fields listed above.
lets the BIOS or a
Auto
lets you set each
Enabled
, , or .
EPP ECP
Chapter 4