Installing The Mec - HP x4000 Technical Reference Manual

Installing or Replacing Parts and Accessories
Memory Expander Card (MEC)
Figure 10-8 Removing the MEC

Installing the MEC

To install the MEC:
1. Replace the MEC, making sure it is fully seated, and tighten the
retaining screw.
2. Replace the chassis beam assembly (see page 153).
3. Close and secure the hard disk drive cage (see page 150).
4. Replace the Workstation cover (see page 148).
5. Reconnect all power cables and any LAN or telecommunications
cables.
156
This manual downloaded from http://www.manualowl.com
Chapter 10