HP x4000 Technical Reference Manual page 166

Installing or Replacing Parts and Accessories
Graphics Card
Figure 10-13 Full-Length Graphics Card Retaining Screw
3. Align the new card carefully and slide it into position. Press it firmly
into the slot.
4. Secure your graphics card:
• If your graphics card came with a separate graphics retainer
Figure 10-14 Graphics Card Retainer Beam
This screw
attaches the
retainer beam to
the rear panel
slot.
164
This manual downloaded from http://www.manualowl.com
beam:
a. Remove both of the universal retainer pieces from the chassis
beam assembly shown in Figure 10-15 and store these in a safe
place for future use.
b. Using the screw that you removed from the rear slot panel and
the graphics card retaining screw shown in Figure 10-13,
attach the graphics retainer beam as shown in Figure 10-14.
Full-Length
Graphics Card
Retaining Screw
Full-Length
Graphics
Card
Retaining
Screw
Chapter 10