HP x4000 Technical Reference Manual page 163

Figure 10-11 Inserting RIMMs and CRIMMs
9. Replace the MEC (see page 156).
10. Replace the chassis beam assembly (see page 153).
11. Close and secure the hard disk drive cage (see page 150).
12. Replace the Workstation cover (see page 148).
13. Reconnect all power cables and any LAN or telecommunications
cables.
14. Start the Workstation and check the Summary Screen by pressing
when prompted to verify the new configuration. The Summary
Esc
Screen displays the amount of memory.
Chapter 10
This manual downloaded from http://www.manualowl.com
Installing or Replacing Parts and Accessories
System Memory
MEC Voltage
Regulator Module
(not on all MECs)
Retaining Clip
fully engaged
161