Honeywell DR Graphic recorder Installation Instruction page 4

7. Insert stud with latch spring into the door handle. See Figure 6.
8. Insert the washer on the stud from the other side to hold the stud in place and insert the white washer onto the latch
handle as shown in Figure 7.
9. Put the Southco spring on to the latch CAM as shown in Figure 8.
10. Insert the Latch CAM and Southco Spring assembly back into the bezel slot.
See Figure 9.
43-TV-33-217 iss.3 GLO Jan 2021 UK
Figure 6
Adding stud to handle
Figure 7
Holding stud in place
with washer
Figure 8
Adding Southco spring
Figure 9
Position of Latch CAM and
Southco Spring assembly
4