Honeywell DR Graphic recorder Installation Instruction page 2

Before attempting to repair or upgrade a recorder, it is advisable to clear sufficient work space so components such as
the front panel can be rested on the work surface without getting scratched or damaged.
Replacing Old Latch Bracket
1. If the latch bracket needs replacement; remove the two screws and washers shown with black arrows. Remove the
latch pin from the right side.
2. Take the new latch bracket and put it in place, reconnect the bracket with the two screws and washers.
Removing Old Door Handle
3. For removing the door handle, remove the two hex screws using an allen wrench as shown in Figure 2.
43-TV-33-217 iss.3 GLO Jan 2021 UK
Figure 2 — Removing both the hex nuts to remove the door handle
Figure 1
Position of latch bracket
2