Specifications - Makita DUR364L Instruction Manual

ENGLISH (Original instructions)
1. Battery cartridge
2. Lock-off lever
3. Switch trigger
4. Power lamp
5. Main power button
6. Reverse button
7. Hanger
8. Grip
9. Protector (cutting tool guard)
10. Shoulder harness
11. Red indicator
12. Button
13. Indicator lamps

SPECIFICATIONS

Model
Type of handle
No load speed
Overall length
Nylon cord diameter
Applicable cutting tool
Cutting blade diameter
Rated voltage
Net weight
Standard battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Nylon cutting head
Plastic blade
Vibration
Nylon cutting head
Plastic blade
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
8
Explanation of general view
14. Check button
15. Battery indicator
16. Most effective cutting area
17. Hex bolt
18. Cover
19. Clamp
20. Cutter
21. Bolt
22. Nylon cutting head
23. Metal guard
24. Receive washer
25. Hex wrench
26. Tighten
Nylon cutting head
(P/N 197297-1/
198971-4/198972-2)
350 mm
4.0 kg
BL1815N/BL1820/BL1820B
Sound pressure level average
L (dB (A))
PA
81
75
Left hand
Uncertainty K
2
a (m/s )
h,W
(m/s
2.5 1.5
2.5 1.5
ENG901-1
DUR364L
Loop handle
5,000/6,500 min
1,754 mm
2.0 – 2.4 mm
Plastic blade
(P/N 198383-1)
255 mm
D.C. 36 V
4.0 kg
Sound power level average
L (dB (A))
WA
89
84.6
Right hand
2
a (m/s )
2 h,W
)
2.5
2.5
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
27. Plastic blade
28. Buckle
29. Hook
30. Latch
31. Spool
32. 80 mm (3-1/8")
33. 100 mm (3-15/16")
34. Housing
35. Eyelet
36. 80-100 mm
37. Arrow on the protector
38. Arrow on the blade
-1
Nylon cutting head
(P/N 197297-1/
198971-4/198972-2)
350 mm
4.5 kg
BL1830/BL1830B/BL1840/BL1840B/
BL1850/BL1850B/BL1860B
Uncertainty K
(dB (A))
0.3
0.8
Uncertainty K
2
(m/s )
1.5
1.5
Plastic blade
(P/N 198383-1)
255 mm
4.5 kg
Applicable
standard
2000/14/EC
Applicable
standard
EN50636-2-91