Table of Contents
Advertisement
17)Apply ATF to a new O-ring, and install it on the down
18) Apply ATF to the down relief valve seat and install it in
19) Install the steel ball, spring guide and the valve spring
relief valve seat.
the valve body as shown noting the direction.
in the down relief valve seat.
20)Apply ATF to a new O-ring, and install it on the upper
21)Apply ATF to the upper chamber safety valve and
chamber safety valve.
install it in the valve body noting the direction shown.
22)Apply ATF to the two new O-rings and install the 0-
rings in the valve body in the positions shown.
23)lnstall the gear pump assembly in the valve body by
aligning the projection at the bottom of the gear pump
assembly with the positioning hole in the valve body.
Take care not to let the O-rings come out of posi-
tion in the valve body.
24)Tighten the socket bolts to the specified torque.
TORQUE: 5 N * m (0.5 kgfem, 1.3 Ibfoft)
1.5
x
3.5 mm
161
DOWN RELIEF
VALVE SEAT
w
w
[
4
1
UPPER CHAMBER
SAFETYVALVE
POSITIONING
13-1 7
Hide quick links:
Advertisement
Table of Contents
