Handlebar (Tiller Handle Type Only) - Honda BF35A Service Manual

THROTTLE BRACKETISHIFT LEVER/
15.
HANDLEBAR (TILLER HANDLE TYPE ONLY)
~
1. LONG TILLER HANDLE
I
1. LONG TILLER HANDLE
a. REMOVAL
1) Remove the engine cover and set the shift lever in
the neutral position.
2) Remove the two 6 x 28 mm flange bolts, two 6 x 40
mm flange bolts and four 6 mm plain washers, and
remove the separator cover.
3) Remove the 14P connector from the connector holder
and disconnect the 14P connector.
4) Remove the 6 mm lock pins and 6 mm washers, the
disconnect the throttle and shift cables.
111
6 mm PLAIN
SEPARATOR
'
6 x 40 (2)
P I
14P
121
CONNECTOR
HOLDER
I
[ l ] THROTTLE CABLE [2] SHIFT CABLE
[31
6 mm
WASHER (4)
15-1