Fuel System - Honda BF35A Service Manual

5.
FUEL SYSTEM
BF40A-BF50A
1. SILENCER COVER 3. CARBURETOR
2. CARBURETOWMANIFOLD REMOVAL 4. CARBURETOWMANIFOLD INSTALLATION
1. SILENCER COVER
a. REMOVAUINSTALLATION
1) Remove the engine cover.
2) Pull off the breather tube from the silencer cover.
3) Unfasten the SE thermal valve heater wire from the
clamp on the silencer cover.
4) Pull off the vinyl tubes from the engine under case.
5) Remove the 6 mm flange bolts, washers and cover
nut, then remove the silencer cover from the silencer
plate.
6) Install the removed parts in the reverse order of
removal.
[GI
VINYL TUBE (2)
11
1
\
COVER NUT
ASSEMBLY:
Insert the vinyl tubes into the holes
in the engine under case as shown.
[6]-1 VINYL
[2] BREATHER TUBE
ASSEMBLY:
Insert until the white line aligns with the
hole edge as shown.
121-1
BREATHER
TUBE
121-2
WHITE LINE
SE THERMAL VALVE
HEATER WIRE
SILENCER COVER
[3]6 mm WASHER(2)
5-1