Operation - Makita CL183D Instruction Manual

Reassembly
1
► 1. Prefilter 2. Filter
First, put filter without being peeled back. If filter is put
on incorrectly, dust will get into motor housing, and
cause motor failure. Second, put prefilter over filter.
1
1
► 1. Securing lip
Turn the set of filters, and adjust the position of the two
securing lips on prefilter, and connect with the gutters of
the cleaner housing.
► 1. Alignment marks
2
1
1
► 1. Handle 2. Capsule
Connect capsule, in accordance with alignment marks
on handle and capsule, firmly twist capsule in direction
of arrow until it is secured.
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that both filter and pre-
filter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.

OPERATION

CAUTION:
• Insert (or extract) nozzle while twisting it clock-
wise. If twisted counterclockwise, capsule may
become loose.
► 1. Capsule
6 ENGLISH
2
1