Makita CL183D Instruction Manual page 5

ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
the battery cartridge is removed before carrying
out any work on the tool.
Disposing of Dust
CAUTION:
• Empty the cleaner before it becomes too full, or
the suction force weakens.
• Be sure to empty out the dust inside the cleaner
itself. Failure to do so may cause the filter to be
clogged or the motor to be damaged.
► 1. Capsule
In order to drop dust sticking on the filter in the capsule,
tap the circumference of the capsule 4 or 5 times with
your hand.
2
► 1. Capsule 2. Suction inlet
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
NOTE:
• Dust may spill out when opening capsule. Be
sure to keep capsule as vertical as possible,
and place a garbage bag beneath capsule.
► 1. Prefilter 2. Capsule
Remove accumulated dust from inside of capsule and
off of prefilter.
► 1. Prefilter 2. Securing lip
1
Twist prefilter in direction of arrow to unfasten securing
lip from cleaner unit and then pull off prefilter.
► 1. Prefilter 2. Filter
Clean out fine dust from prefilter. Next, remove filter,
1
and lightly tap to dislodge dust.
5 ENGLISH
1
2
1
1
2
2