Troubleshooting During The Installation Of A New Ciu 888 License - Honeywell CIU 888 Firmware Upgrade Manual

NOTE: Perform steps 1 up to and including 13 of the procedure described in
NOTE: Perform steps 1 up to and including 13 of the procedure described in
2 - 12
License Updates
3. Install the new CIU 888 license on the secondary CIU 888. See
section 2.3 for more information.
section 2.3.
After installation of the new CIU 888 license, the secondary CIU 888
needs to be restarted (part of the procedure). Once the secondary
CIU 888 is restarted, the new license will be effective and the
secondary CIU 888 assumes the active role.
4. Shut down the secondary CIU 888, see step 2.
5. Start the primary CIU 888 by switching the on/switch to the 'ON'
position.
The primary CIU 888 will assume the active role.
6. Install the new CIU 888 license on the primary CIU 888, see
section 2.3 for more information.
section 2.3.
After installation of the new CIU 888 license, the primary CIU 888
needs to be restarted (part of the procedure). Once the primary
CIU 888 is restarted, the new license will be effective and the primary
CIU 888 will continue in the active role.
7. Start the secondary CIU 888 by switching the on/off switch to the
'ON' position.
Once the secondary CIU 888 is started, it assumes the passive role.
8. If required, change the CIU 888 system setup. Refer to the Configu-
ration Manual CIU 888 (Part No. 4417593) for more information.
9. If the CIU 888s include the sealing option and are intended to be
sealed, have them sealed by a representative of the W&M authorities
or by a W&M accredited user. Refer to the Sealing Guide CIU 888
(Part No. 4417595) for more information.
10.Verify that the system setup is working properly. Refer to
section 2.10 in the Configuration Manual CIU 888 (Part No.
4417593) for more information.

2.5 Troubleshooting during the installation of a new CIU 888 license

For more information about problems and errors that may be
encountered during the installation of a new CIU 888 license, refer to
the Troubleshooting & Maintenance Guide CIU 888 (Part No. 4417594).
Firmware Upgrade Manual
CIU 888
Part No.: 4417596_Rev11