Honeywell CIU 888 Firmware Upgrade Manual page 28

FIGURE 2-7
TABLE 2-1
2 - 6
License Updates
7. If required, click View License to view the details of the license that
is currently installed.
The View License window is displayed (see FIGURE 2-7).
CIU 888 Web interface - View License window
The View License window provides the following information (see
TABLE 2-1):
Description of license details
Field
Customer Name
License creation date
Site name
Software MSG
Hardware MSG
Calculations enabled
Redundancy enabled
Number of tanks
W&M enabled
Firmware Upgrade Manual
CIU 888
Description
Displays the name of the customer/company to whom the
license was issued.
Displays the date (year-month-day) and time (hours:minutes:
seconds) when the license was created.
Displays the name of the site as configured during commis-
sioning of the CIU 888. See the CIU 888 Configuration Man-
ual (Part No. 4417593) for more information.
Displays the software license code as defined according to
the Model Selection Guide for the CIU 888 (see
APPENDIX A).
Displays the hardware license code as defined according to
the Model Selection Guide for the CIU 888 (see
APPENDIX A).
Displays whether the Volume Calculation module is enabled
(true) or not (false).
Displays whether redundancy is enabled (true) or not (false).
Displays the maximum number of tanks supported by the
CIU 888.
Displays whether the CIU 888 is Weights and Measures
approved (true) or not (false).
Part No.: 4417596_Rev11