HIKVISION DE1A Series Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DE1A Series
  6. Quick start manual
HIKVISION DE1A Series Quick Start Manual

HIKVISION DE1A Series Quick Start Manual

Network ptz camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network PTZ Camera·Quick Start Guide
Network PTZ Camera
Quick Start Guide
i

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DE1A Series

Summary of Contents for HIKVISION DE1A Series

  • Page 1 Network PTZ Camera·Quick Start Guide Network PTZ Camera Quick Start Guide...
  • Page 2 Network PTZ Camera·Quick Start Guide Quick Start Guide © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
  • Page 3 SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,...
  • Page 4 Network PTZ Camera·Quick Start Guide PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN...
  • Page 5 Network PTZ Camera·Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 Network PTZ Camera·Quick Start Guide 2015/35/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 Network PTZ Camera·Quick Start Guide Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
  • Page 8 Network PTZ Camera·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 9 Network PTZ Camera·Quick Start Guide  Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.  Make sure that the plug is firmly connected to the power socket.  Make sure that the power has been disconnected before you wire, install or dismantle the PTZ camera.
  • Page 10 Network PTZ Camera·Quick Start Guide  Do not touch senor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, replace the lens cap to protect the sensor from dirt.
  • Page 11 Network PTZ Camera·Quick Start Guide  Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.  Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

  • Page 12: Table Of Contents

    Network PTZ Camera·Quick Start Guide Table of Contents 1 Overview ..................1 1.1 Introduction ................... 1 1.2 Cable Descriptions ................. 1 1.3 Alarm Output ................. 2 2 Installation .................4 2.1 Installing the Memory Card ............4 2.1.1 DE1Axxx(I) Series PTZ Camera..........4 2.1.2 DE2Axxx(I) Series PTZ Camera..........
  • Page 13 Network PTZ Camera·Quick Start Guide 2.6.3 Base Mounting ..............39 2.7 Installing DE4AxxxI Series PTZ Camera ........40 2.7.1 Ceiling Mounting ..............41 2.7.2 In-ceiling Mounting .............. 41 2.8 Installing DE3AxxxI Series PTZ Camera ........44 2.8.1 Wall Mounting..............44 2.9 Installation of Network Cable Water-proof Jacket ....

  • Page 14: Overview

    Network PTZ Camera·Quick Start Guide 1 Overview 1.1 Introduction The network PTZ camera has the following series:  DE1Axxx(I) Series PTZ Camera  DE2Axxx(I) Series PTZ Camera  DE2xxx(I) Series Mini PTZ Camera  DE3xxx Series PTZ Camera  DY3xxx Series PTZ Bullet Camera ...

  • Page 15: Alarm Output

    Network PTZ Camera·Quick Start Guide DC12V IN Power Cord Video Cable RS-485 . . . Alarm Cable Audio Cable Network Cable Cables of PTZ Camera Figure 1-1  Power Cord: Supports 12 VDC power supply.  Video Cable: Connect BNC Cable to test the video output. ...
  • Page 16 Network PTZ Camera·Quick Start Guide Output DC 30V JQC-3FG Relay Power Supply (10A 250VAC) Direct load OUT (n) Relay Output ~220V AC Relay Output Zero OUT (n) OUT (n) FireWire Line OUT (n) Alarm Output Figure 1-2...

  • Page 17: Installation

    Network PTZ Camera·Quick Start Guide 2 Installation Before you start: Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included. Notes:  Do not drag the PTZ camera with its waterproof cables; otherwise the waterproof performance is affected.
  • Page 18 Network PTZ Camera·Quick Start Guide Open the Cover Figure 2-1 Unscrew the screws on the camera base with the cross screwdriver, and remove the bubble, as shown in Figure 2-2. Bubble Screw Remove the Bubble Figure 2-2 The position of memory card are various according to different camera model.
  • Page 19 Network PTZ Camera·Quick Start Guide Reset Memory Card Slot Insert the Memory Card Figure 2-3 Type II: align the memory card with the memory card slot and insert it. Reset Memory Card Slot Insert the Memory Card Figure 2-4 Align the bubble with the camera base, and install the bubble back. Fix the bubble with four screws, as shown in Figure 2-5.
  • Page 20 Network PTZ Camera·Quick Start Guide Install the Bubble Figure 2-5 Align the cover with the camera, and install the cover back, as shown in Figure 2-6. Cover Install the Cover Figure 2-6...

  • Page 21: De2Axxx(I) Series Ptz Camera

    Network PTZ Camera·Quick Start Guide 2.1.2 DE2Axxx(I) Series PTZ Camera Note: The installation steps are similar to the installation steps of DE1Axxx(I) series camera. Refer to section 2.1.1 DE1Axxx(I) Series PTZ Camera. 2.1.3 DE2xxx(I) Series Mini PTZ Camera Ｍｏｄｅｌ　Ｎａｍｅ：ＤＳ－２ＤＥ２２０４ＩＷ－ＤＥ３／Ｗ，ＤＳ－２ＤＥ２４０２ＩＷ－ＤＥ３／Ｗ Steps: 1.

  • Page 22: De3Xxx Series Ptz Camera

    Network PTZ Camera·Quick Start Guide Rotate the cover to a proper position, align the memory card with the memory card slot and insert it. Insert the Memory Card Figure 2-9 Rotate the cover and push it back. 2.1.4 DE3xxx Series PTZ Camera Steps: 1.

  • Page 23: Dy3Xxx Series Ptz Bullet Camera

    Network PTZ Camera·Quick Start Guide 2. Align the memory card with the memory card slot and insert it. 3. Fix the screws and assemble the PTZ camera. 2.1.5 DY3xxx Series PTZ Bullet Camera For DY3xxx series PTZ bullet camera, the memory card slot is in the camera module and if you need, the memory card can be installed before the camera leaves the factory.
  • Page 24 Network PTZ Camera·Quick Start Guide Remove the Bubble and the Decorative Rim Figure 2-12 3. Open the memory card cover and insert the memory card into the card slot as shown in Figure 2-13 and Figure 2-14. For 20× Camera Module Figure 2-13...

  • Page 25: De3Axxxi Series Ptz Camera

    Network PTZ Camera·Quick Start Guide For 4× Camera Module Figure 2-14 4. Close the memory card cover. Fix the four flange screws and push four silicone plugs back to assemble the PTZ camera. 2.1.7 DE3AxxxI Series PTZ Camera Steps: 1. Pull the decorative cover out and loosen 2 screws on memory card cover with screwdriver as shown in Figure 2-15.
  • Page 26 Network PTZ Camera·Quick Start Guide 2. Remove the memory card cover, including sealing ring, and insert the memory card as printed mark. Memory card Insert the memory card Figure 2-16 3. Screw the memory cover back, making sure the sealing ring is flat, and then close the decorative cover.

  • Page 27: Installing De1Axxx(I) Series Ptz Camera

    Network PTZ Camera·Quick Start Guide 2.2 Installing DE1Axxx(I) Series PTZ Camera 2.2.1 Ceiling Mounting Notes:  The thickness of the ceiling shall range from 5 mm to 40 mm.  Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories.
  • Page 28 Network PTZ Camera·Quick Start Guide Fix the Installation Plate Figure 2-19 4. Route the cables from the cable hole in the installation plate. Note: Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 5. Align the camera with the installation plate, and rotate the camera clockwise to fix it, as shown in Figure 2-20.

  • Page 29: Wall Mounting

    Network PTZ Camera·Quick Start Guide 2.2.2 Wall Mounting Notes:  For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. ...
  • Page 30 Network PTZ Camera·Quick Start Guide Fixing Screw Bracket Base Remove the Bracket Base Figure 2-22 3. Install the bracket base on the wall with four screws. Install the Bracket Base Figure 2-23 4. Route the cables. Align the camera with the installation plate on the wall mounting bracket, and rotate the camera clockwise to fix it on the bracket.

  • Page 31: Installing De2Axxx(I) Series Ptz Camera

    Network PTZ Camera·Quick Start Guide 5. Connect the cables. Install the wall mounting bracket to the bracket base on the wall, and fix it with the supplied screw. Note: Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. Fix the Bracket Figure 2-25 6.

  • Page 32: Wall Mounting

    Network PTZ Camera·Quick Start Guide 2.4.1 Wall Mounting Notes:  For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. ...
  • Page 33 Network PTZ Camera·Quick Start Guide Base Plate for DE2xxxI Series (IR) PTZ Camera Figure 2-27 2. Align the cable hole on the base plate with the hole on the bracket for wiring. And install the base plate to the bracket by fixing three ×...
  • Page 34 Network PTZ Camera·Quick Start Guide For DE2xxxI Series (IR) PTZ Camera Figure 2-29 3. Route the cables through the cable hole. 4. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise to the base plate, and the PTZ camera is secured with the base plate by three locks on the plate.
  • Page 35 Network PTZ Camera·Quick Start Guide Secure DE2xxxI Series (IR) PTZ Camera Figure 2-31 × Secure the mounting base to the wall with four PA4 25 screws (supplied). Install the Mounting Base Figure 2-32 Install the PTZ camera to the bracket. 1).

  • Page 36: Ceiling Mounting

    Network PTZ Camera·Quick Start Guide Secure the Mounting Base Figure 2-33 Note: Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 2.4.2 Ceiling Mounting Purpose: There are two ceiling mounting types provided for the camera, and we take the mounting without the junction box as the example.
  • Page 37 Network PTZ Camera·Quick Start Guide For the cables routed from the top of the back box, it is required to drill a cable hole in the ceiling. Cabling for DE2xxx Series PTZ Camera Figure 2-34 Cabling for DE2xxxI Series (IR) PTZ Camera Figure 2-35 Note: Water-proof treatment is required for cable connectors.
  • Page 38 Network PTZ Camera·Quick Start Guide Attach the Drill Template Figure 2-36 3. Drill a cable hole in the ceiling according to the circle A on the template if you want to route the cables through the ceiling. Pull out the cable slot cover if you want to route the cables on the surface of the ceiling, as shown in Figure 2-37.
  • Page 39 Network PTZ Camera·Quick Start Guide Cable Slot Cover For DE2xxxI Series (IR) PTZ Camera Figure 2-38 4. Attach the base plate to the ceiling and secure it with the supplied three self-tapping screws by aligning with three screw holes in the ceiling, and the front arrows on the drill template and base plate should be aligned together as well, as shown in Figure 2-39 and Figure 2-40.
  • Page 40 Network PTZ Camera·Quick Start Guide For DE2xxxI Series (IR) PTZ Camera Figure 2-40 5. Route the cables through the cable hole. 6. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate.

  • Page 41: Installing With Junction Box

    Network PTZ Camera·Quick Start Guide 2.4.3 Installing with Junction Box Notes:  The thickness of the ceiling shall range from 5 mm to 40 mm.  Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories. Steps: 1.
  • Page 42 Network PTZ Camera·Quick Start Guide OPEN Base Plate on the Bottom of the Dome Front View of Base Plate For DE2xxxI Series (IR) PTZ Camera Figure 2-43 2. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and make sure the front arrow appoints to the monitoring area.
  • Page 43 Network PTZ Camera·Quick Start Guide on the drill template and junction box should be aligned together as well. Fix the Junction Box Figure 2-45 5. Connect the cables and route the cables clockwise through the hooks and fix the camera and the junction box with three hooks. Tighten it clockwise and loosen it anticlockwise.

  • Page 44: Installing De3Xxx Series Ptz Camera

    Network PTZ Camera·Quick Start Guide 6. Secure the PTZ camera and remove the protective film. 2.5 Installing DE3xxx Series PTZ Camera DE3xxx series PTZ camera supports ceiling mounting and in-ceiling mounting. Note: Wall mounting, installation with junction box, and installation with tripod are supported for DE3xxx series PTZ camera.
  • Page 45 Network PTZ Camera·Quick Start Guide Attach the Drill Template Figure 2-47 3. Insert the expansion screws into the ceiling. (Optional) × 4. Insert four PM4 10 screws into the ceiling and fix the base plate, as shown in Figure 2-48. Make sure the FRONT arrow of the base plate is of the same direction as the arrow of the drill template.

  • Page 46: In-Ceiling Mounting

    Network PTZ Camera·Quick Start Guide clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate. Note: Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 6.
  • Page 47 Network PTZ Camera·Quick Start Guide 1. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and drill a hole in the ceiling according to the template. Drill Template Figure 2-50 2. Fix the base plate onto the in-ceiling bracket with the four screws in the package (supplied).
  • Page 48 Network PTZ Camera·Quick Start Guide 3. Connect the cables and route the cable through the cable hole. Note: Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 4. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate.

  • Page 49: Installing Dy3Xxx Series Ptz Bullet Camera

    Network PTZ Camera·Quick Start Guide Assemble the Decorative Rim Figure 2-53 7. Secure the camera and remove the protective film. 2.6 Installing DY3xxx Series PTZ Bullet Camera 2.6.1 Dimensions of DY3xxx Series PTZ Bullet Camera Two structures of DY3xxx Series PTZ bullet cameras are available: wall-mounted PTZ bullet camera and base-mounted PTZ bullet camera.
  • Page 50 Network PTZ Camera·Quick Start Guide Wall-mounted PTZ Bullet Camera Figure 2-54  Dimensions of base mounted PTZ bullet camera is shown in Figure 2-55. 4-φ7 Unit: mm Base-mounted PTZ Bullet Camera Figure 2-55...

  • Page 51: Wall Mounting

    Network PTZ Camera·Quick Start Guide 2.6.2 Wall Mounting Before you start: The wall-mounted PTZ bullet camera can be installed on cement wall and pole mounting. The installing environment shall meet the following conditions:  For cement wall, you need to use the expansion screw to fix the bracket.

  • Page 52: Base Mounting

    Network PTZ Camera·Quick Start Guide 3. Fix the camera on the wall by knocking the expansion screws into the wall through the bracket, as shown in Figure 2-57. Install the Wall-mounted PTZ Bullet Camera Figure 2-57 Notes:  To install the PTZ bullet camera with the pole, you can use hexagon socket screws instead of the expansion screws.

  • Page 53: Installing De4Axxxi Series Ptz Camera

    Network PTZ Camera·Quick Start Guide 1. Drill screw holes on the plane surface according to the dimensions of base-mounted camera. Insert four M6 hexagon socket screws (with length of 30 mm) through the camera bracket and the plane structure, and then lock the screw nuts to fix the camera, as shown in Figure 2-58.

  • Page 54: Ceiling Mounting

    Network PTZ Camera·Quick Start Guide 2.7.1 Ceiling Mounting Ceiling mounting for DE4AxxxI series (IR) PTZ camera is similar to ceiling mounting for DE2xxx series & DE2xxxI series (IR) PTZ camera. Refer to section 2.4.2 Ceiling Mounting for details. Note: After DE4AxxxI series (IR) PTZ camera is installed, tighten the fixing screw with a screwdriver as shown in Figure 2-59.
  • Page 55 Network PTZ Camera·Quick Start Guide Separate the Base Plate from the Rotate Counterclockwise PTZ Camera Separate the Base Plate from the PTZ camera Figure 2-60 2. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and drill a hole in the ceiling according to the template.
  • Page 56 Network PTZ Camera·Quick Start Guide Fix the Base Plate to In-ceiling Bracket Figure 2-62 4. Connect the cables and route the cables through the cable hole. Note: Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 5.

  • Page 57: Installing De3Axxxi Series Ptz Camera

    Network PTZ Camera·Quick Start Guide 7. Place the camera and the bracket into the hole drilled in step 2, and rotate the screws clockwise to fix the camera. 8. Fix the decorative rim with the bubble and the decorative rim will be attached to the in-ceiling bracket automatically, as shown in Figure 2-64.
  • Page 58 Network PTZ Camera·Quick Start Guide  For wooden wall, you can just use the self-tapping screw to fix the bracket.  Make sure that the wall is strong enough to withstand more than eight times the weight of the PTZ camera and its cable Steps: 1.
  • Page 59 Network PTZ Camera·Quick Start Guide and connect cables through the wall and the cable hole on the bracket.  For the cables routed on the wall surface, you need to route the cables through the middle slot on the bottom of the back box, as shown in Figure 2-66.
  • Page 60 Network PTZ Camera·Quick Start Guide Fix the bracket Figure 2-67 4. Fix the camera to the mounting bracket. Route the cables. Align the camera to the wall mounting bracket, and push camera body until hear a click sound. Tighten the screws under the bracket. Fix the camera Figure 2-68 5.

  • Page 61: Installation Of Network Cable Water-Proof Jacket

    Network PTZ Camera·Quick Start Guide Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 6. Put cables in the back box, then close the decorative cover as shown in Figure 2-69. Back box Connect the cables Figure 2-69 2.9 Installation of Network Cable Water-proof Jacket Purpose:...

  • Page 62: Installation Of Water-Proof Tape

    Network PTZ Camera·Quick Start Guide Align Installation of waterproof jacket Figure 2-70 Steps: 1. Feed the network cable through ① and ③ in order. 2. Fix ② on the network cable between ① and ③. 3. Place ⑤ onto the end of ⑥, and plug the RJ45 male connector into RJ45 female connector.
  • Page 63 Network PTZ Camera·Quick Start Guide Steps: 1. Tear off the yellow release paper on the back of the water-proof tape. 2. Stretch the water-proof tape to reach twice the initial length. Initial Length Stretch Stretch Waterproof Tape Length After Stretching Stretch the Water-proof Tape Figure 2-71 3.
  • Page 64 Network PTZ Camera·Quick Start Guide Wrap the Water-proof Tape Figure 2-72 Note: Make sure that all naked wires are all firmly wrapped in the water-proof tape. 4. Press the tape on both ends of the connector to make sure no water can get in as the figure below.
  • Page 65 Network PTZ Camera·Quick Start Guide 5. Wrap the water-proof tape around the remaining unused cables tightly as the figure below. Wrap the Unused Cables Figure 2-74 Note: Make sure that all naked wires are all firmly wrapped in the water-proof tape. 6.

  • Page 66: Protective Measures For Outdoor Installation

    Network PTZ Camera·Quick Start Guide 2.11 Protective Measures for Outdoor Installation If the device is installed outdoors, necessary protective measures should be taken to ensure safety. Scan the following QR code to get protective measures for outdoor installation.

  • Page 67: Activate And Access Network Camera

    Network PTZ Camera·Quick Start Guide 3 Activate and Access Network Camera Scan the QR code to get Activate and Visit Network Camera. Note that mobile data charges may apply if Wi-Fi is unavailable.
  • Page 68 Network PTZ Camera·Quick Start Guide UD11955B-B...

This manual is also suitable for:

De1a i seriesDe2a seriesDe2a i seriesDe2 seriesDe2 i seriesDe3 series ... Show all

Table of Contents