HIKVISION DS-2DF5284-A User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2DF5284-A
  6. User manual

HIKVISION DS-2DF5284-A User Manual

5 inch network high-definition speed dome
Hide thumbs Also See for DS-2DF5284-A:
Table of Contents

Advertisement

Quick Links

5 Inch Network High-definition Speed Dome
User Manual
V2.0.0
2010-01

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2DF5284-A

Summary of Contents for HIKVISION DS-2DF5284-A

  • Page 1 5 Inch Network High-definition Speed Dome User Manual V2.0.0 2010-01...
  • Page 2 5 Inch Network High-definition Speed Dome User Manual Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to 5 Inch Network High-definition Speed Dome. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual.

  • Page 3: Safety Instruction

    5 Inch Network High-definition Speed Dome User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.

  • Page 4: Table Of Contents

    5 Inch Network High-definition Speed Dome User Manual TABLE OF CONTENTS TABLE OF CONTENTS............................. 3 Chapter 1 Brief Introduction............................5 1.1 Description..............................5 1.2 Outline ................................5 1.3 Functions ............................... 5 1.4 Features................................7 1.5 Default IP, User Name and Password ......................8 Chapter 2 Operation Instructions..........................
  • Page 5 5 Inch Network High-definition Speed Dome User Manual Appendix 1 Network Cable Connection........................45 Appendix 2 Lightning & Surge Protection ........................ 46 Appendix 3 RS485 Bus Connection .......................... 47 Appendix 4 24VAC Wire Gauge & Transmission Distance ..................50 Appendix 5 Table of Wire Gauge Standards......................51...

  • Page 6: Chapter 1 Brief Introduction

    5 Inch Network High-definition Speed Dome User Manual Chapter 1 Brief Introduction 1.1 Description Integrating the network remote monitoring capability with the functions of the high speed dome, the Network High Speed Dome is a new product model which features easy installation and operation and facilitated wiring design. With built-in video server, the Network Speed Dome is capable of providing the following new features: real-time video stream compressed and then transmitted via network to different clients simultaneously;...
  • Page 7 5 Inch Network High-definition Speed Dome User Manual  Limit Stops The dome can be programmed to move within the limit stops (left/right, up/down) which are configurable by the control keyboard, DVR or client application software.  Auto Scan The dome provides 5 scanning modes: pan scanning, tilt scanning, frame scanning, random scanning and panorama scanning. The scanning speed can be set by OSD menu from level 1 to 40, with the corresponding speed ranging from 1°/second to 40°/second.

  • Page 8: Features

    5 Inch Network High-definition Speed Dome User Manual If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation (BLC) enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white.

  • Page 9: Default Ip, User Name And Password

    5 Inch Network High-definition Speed Dome User Manual  4 patterns, with the recording time reaching up to 10 minutes;  RS-485 bus control;  Up to 24 privacy mask areas programmable (depending on camera models)  Self-adaptive to PELCO-D, PELCO-P, PRIVATE-Code, etc., with various baud rates selectable. Built-in Pan/Tilt ...

  • Page 10: Chapter 2 Operation Instructions

    5 Inch Network High-definition Speed Dome User Manual Chapter 2 Operation Instructions 2.1 Power-up Action After the power is applied, the speed dome will perform self-test action that begins with lens actions and then pan and tilt movement. After completion of power-up self-test actions, the interface as shown in Figure 2.1 will be displayed on screen for 40 seconds. The System Information displayed on the screen includes the Dome Address, Protocol, Version and other information.

  • Page 11: Label Display

    5 Inch Network High-definition Speed Dome User Manual 2.3 Label Display The dome allows you to configure how labels are displayed on the monitor. The following labels are available: Zoom: Identifies the amount of magnification. Direction: Displays compass direction, with the format of PXXX TXXX. The XXX following P refers to the degrees in pan direction, while the XXX following T indicates the degrees in tilt position.

  • Page 12: Chapter 3 Menu Operation

    5 Inch Network High-definition Speed Dome User Manual Chapter 3 Menu Operation The menu varies depending on camera models. Note: Menu Tree...

  • Page 13: Main Menu

    5 Inch Network High-definition Speed Dome User Manual 3.1 MAIN MENU After logon to IE browser or client software, call preset 95 to access the main menu of the dome. Refer to Figure 3.1.1. Click the direction buttons on PTZ control section to move the cursor to the selected menu item. Press IRIS+ to confirm, i.e., operation can be done on this menu options.

  • Page 14: System Info Settings

    5 Inch Network High-definition Speed Dome User Manual 3.3.1 SYSTEM INFO SETTINGS The SYSTEM INFO SETTINGS menu is used for setting the soft address, date and time, display information, etc. Refer to Figure 3.3.3 and Figure 3.3.4.  SOFT ADDRESS When the ENABLE SOFT ADDRESS option is set to ENABLE, the speed dome will use the soft address, and the addresses from 1 to 255 selectable.

  • Page 15: Camera Settings

    5 Inch Network High-definition Speed Dome User Manual azimuth/elevation and zoom label are displayed all the time in other status. The external alarm response actions can be activated in non-menu programming mode while disabled in the menu programming mode.  IP ADDRESS Enter the IP ADDRESS menu and then use the direction buttons to define of value of IP address and sub mask.
  • Page 16 5 Inch Network High-definition Speed Dome User Manual <CAMERA> EXP COM/NOISE REDUCE PICTURE FLIP DISABLE WHITE BALANCE R GAIN B GAIN FOCUS NEAR LIMIT INITIALIZE LENS DISABLE BACK EXIT Figure 3.3.10  AUTO FOCUS The camera provides three focus modes for selection: ENABLE, DISABLE and PTZ TRIGGER. In auto focus mode (ENABLE), the camera will allow the lens to remain in focus when using pan, tilt and zoom (PTZ) functions.

  • Page 17: Motion Settings

    5 Inch Network High-definition Speed Dome User Manual When the Wide Dynamic Range (WDR) function is on, the dome is able to balance the brightest and darkest sections of a scene to produce a picture that is better balanced in lighting and provides more details. Note: The BLC/WDR feature varies depending on camera model.
  • Page 18 5 Inch Network High-definition Speed Dome User Manual Figure 3.3.11  PROPORTIONAL PAN When the PROPORTIONAL PAN is set to ENABLE, the dome will automatically reduce or increases the pan and tilt speeds in proportion to the amount of zoom. At telephoto pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings.

  • Page 19: Line Sync

    5 Inch Network High-definition Speed Dome User Manual <LIMIT SETTINGS> LIMIT ENABLE DISABLE <SET MANUAL STOPS> <CLEAR MANUAL STOPS> <SET SCAN STOPS> <CLEAR SCAN STOPS> <SET PANORAMA SCAN STOPS <CLEAR PANORAMA SCAN STOPS> BACK EXIT Figure 3.3.12  SET MANUAL STOPS: To set limit stops manually: 1.

  • Page 20: Patrols

    5 Inch Network High-definition Speed Dome User Manual <PRESETS> PRESET NUMBER PRESET LABEL PRESET1 <SET PRESET LABEL> <EDIT PRESET SCENE> <CLEAR PRESET> BACK EXIT Figure 3.3.13  PRESET NUMBER The dome provides 256 presets. The PRESET NUMBER displays the preset under current operation. If the preset has been defined, the corresponding number will appear;...

  • Page 21: Patterns

    5 Inch Network High-definition Speed Dome User Manual  PATROLS NUMBER The dome provides 8 patrols numbering from 1 to 8. <PATROLS> PATROL NUMBER <PATROL EDIT> <PATROL PERVIEW> <PATROL CLEAR> BACK EXIT Figure 3.3.16 Figure 3.3.17  PATROL EDIT The EDIT PATROL settings menu is shown in Figure 3.3.17. A patrol can be configured with 32 presets. To edit a patrol: Use the Up and Down direction buttons to select the preset to be edited.

  • Page 22: Privacy Mask

    5 Inch Network High-definition Speed Dome User Manual controller or automatically by a configured function (alarm, park, time task, or power-up). Refer to Figure 3.3.18 for the PATTERNS settings menu: REMAINING MEMORY(%) IRIS+ OK IRIS- CANCEL Figure 3.3.18 Figure 3.3.19 ...

  • Page 23: Aux

    5 Inch Network High-definition Speed Dome User Manual <PRIVACY MASK> SET WINDOW POSITION WINDOW NUMBER FOCUS+SWITCH CONTENT WINDOW ENABLE DISABLE IRIS+ OK <WINDOW SETTINGS> IRIS- CANCEL <CLEAR WINDOW> BACK EXIT Figure 3.3.20 Figure 3.3.21  WINDOW SETTINGS To set a window blanking area: Use the joystick or direction buttons to position the cursor beside WINDOW SETTINGS and then press IRIS+ to enter the window blank settings menu.

  • Page 24: Clear

    5 Inch Network High-definition Speed Dome User Manual 3.3.10 CLEAR Refer to Figure 3.3.23 for the CLEAR settings menu. Use this menu to clear all user-defined settings, including presets, patrols, patterns and privacy mask. <CLEAR> <CLEAR ALL PRESETS> <CLEAR ALL PATROLS> <CLEAR ALL PATTERNS>...

  • Page 25: Reset Camera

    5 Inch Network High-definition Speed Dome User Manual Alarm Inputs AUX1 Alarm Display/Time Display Display of Zoom, Azimuth/Elevation and Display for 2 seconds Preset Label display 3.5 RESET CAMERA This function is used to reset all camera settings to factory default parameters. 3.6 REBOOT SYSTEM This function is used to reboot the system.

  • Page 26: Chapter 4 Access To Network Speed Dome

    5 Inch Network High-definition Speed Dome User Manual Chapter 4 Access to Network Speed Dome This chapter has described the configuration for the network speed dome through IE or client software. Note: There are several network parameters of the network speed dome that need to be set after the hardware installation. Those parameters including IP address, subnet mask and port number, etc.
  • Page 27 5 Inch Network High-definition Speed Dome User Manual Figure 4.1.1 If it still fails to install the ActiveX Control, please open the IE browser and set the security level to Low in Tools/Internet Options/Security/Customize or enable the ActiveX Controls and Plug-Ins directly. Refer to Figure 4.1.2. For safety on the Internet, once you can view the video from camera, the security level can be resumed to “default level”.
  • Page 28 5 Inch Network High-definition Speed Dome User Manual Live Preview interface. Double click the Camera 01 or Preview button to view the menu as Figure 4.1.4. Right double click the Camera 01 channel, and the Main Stream, Sub Stream and Open Sound options will pop up. Figure 4.1.3 Login...
  • Page 29 5 Inch Network High-definition Speed Dome User Manual Figure 4.1.4 Live Preview As shown in Figure 4.1.4, the Playback and Log functions are operable only when the speed dome is configured with SD memory card (above 1G). If the speed dome is configured with SD card, the SD card must be formatted before use by clicking Enter Remote Note: Configuration in Configure menu to enter the HDD management.

  • Page 30: Access By Client Software

    5 Inch Network High-definition Speed Dome User Manual Figure 4.1.6 Remote Configuration 4.2Access by Client Software 4.2.1 Configuration through Client Software After the installation of iWMS-4000 (V2.0), click Start->>Program->> iWMS-4000 (V2.0) to start the client software and a dialog box of Register Administrator will appear, as shown in Figure 4.2.1.
  • Page 31 5 Inch Network High-definition Speed Dome User Manual The password should be no less than 6 characters. Note: Figure 4.2.1 Register Administrator /After the registration is succeed, input the user name and password in the User Login dialog box and then click Login to enter the Preview interface.
  • Page 32 5 Inch Network High-definition Speed Dome User Manual Figure 4.2.3 Preview Interface Click from the menu bar to enter the configuration interface. Refer to Figure 4.2.4. Right click the blank on the left and select Add Area.
  • Page 33 5 Inch Network High-definition Speed Dome User Manual Figure 4.2.4 Add Area The Add Area dialog box will pop up, as shown in Figure 4.2.5. Input the area name in the text box and click OK to save the area. Figure 4.2.5 Add Area Name The area name added will appear under the site tree.
  • Page 34 5 Inch Network High-definition Speed Dome User Manual Figure 4.2.6 Add Device The Add Device dialog box will pop up, as shown in Figure 4.2.7. Input the device name, register mode (Normal IP), device IP (e.g., 172.8.3.205), user name (admin), password (12345), port (8000) and channel No. (1) in the text boxes and click OK to save the device information.
  • Page 35 5 Inch Network High-definition Speed Dome User Manual Figure 4.2.8 Site Tree After having added the site tree, click the Preview button from the menu bar to enter the Preview interface, as shown in Figure 4.2.9. Double click the channel name under the site tree to view the camera video. Figure 4.2.9 Preview Interface...

  • Page 36: Intelligent Positioning

    5 Inch Network High-definition Speed Dome User Manual In the Preview interface, call preset 95 to access the main menu of speed dome, and use the up/down/left/right buttons to select the submenu and then click IRIS+ button to enter the submenu to be configured. Refer to Figure 4.2.10. Figure 4.2.10 Enter Main Menu Please refer to User Manual of iWMS-4000 (V2.0) for detailed information about configuration.
  • Page 37 5 Inch Network High-definition Speed Dome User Manual Figure 4.2.11 3D Position Icon Figure 4.2.12 3D Positioning...
  • Page 38 5 Inch Network High-definition Speed Dome User Manual Figure 4.2.13 3D Positioning Clicking and dragging the mouse from upper left to lower right will realize zoom in function, and from lower right to upper left will realize zoom out function.

  • Page 39: Presets

    5 Inch Network High-definition Speed Dome User Manual Figure 4.2.14 3D Positioning 4.2.3 Presets Add Preset: After having moved PTZ to the desired position, click the icon from the Preview interface, select a preset number from the list, and finally click the Add Preset button to enter the Add Preset dialog box. Input the preset name in the text box, and then click OK to add the preset.

  • Page 40: Patrols

    5 Inch Network High-definition Speed Dome User Manual Figure 4.2.18 Call Preset Delete Preset: Select a predefined preset from the list and click the Delete preset button to delete a preset. Refer to Figure 4.2.19. The system will pop up a message as shown in Figure 4.2. 20. Click OK to delete the preset. The preset can also be deleted by right-clicking the predefined preset and select Delete submenu.

  • Page 41: Configuration By Ds-9000 Series Dvr

    5 Inch Network High-definition Speed Dome User Manual Figure 4.2.23 Patrol Setting Figure 4.2.24 Patrol Setting Call Patrol: Select a predefined patrol from the list and click Call the Patrol button to call a patrol. Refer to Figure 4.2.25. Stop Patrol: Select a predefined patrol from the list and click Stop the Patrol button to stop a patrol. Refer to Figure 4.2.26. Figure 4.2.25 Call Patrol Figure 4.2.26 Stop Patrol 4.3 Configuration by DS-9000 Series DVR...

  • Page 42: Search And Modify Ip By Sadp

    5 Inch Network High-definition Speed Dome User Manual Figure 4.3.1 Camera Management Figure 4.3.2 IP Channel Settings If the network speed dome and DVR are in the same segment, select the device from the list to be added and then input the user name and password in the lower dialog box, and finally click OK to add the device.

  • Page 43: Modify Device Information

    5 Inch Network High-definition Speed Dome User Manual address, Port number, Device Serial No., subnet mask, MAC address, the number of channels, main control and encoding version and device initiating time are showed in the list, as following: Figure 4.4.1 Search Online Devices 4.4.2 Modify device information Select the device that needs modification in the device list, then basic information of the device will be demonstrated in the information column on the right.

  • Page 44: Resume Default Password

    5 Inch Network High-definition Speed Dome User Manual Figure 4.4.2 Modify Device Information Input new IP address, subnet mask, and port number, and click ‘save’ button. If a dialog pops up, showing ‘saved successfully’, that means you have modified the configuration information; if ‘saving failed’ turns up, click the ‘cancel’ button to quit it. 4.4.3 Resume default password You can reset the password of the super user as 12345 in case of having forgotten administrator’s password.
  • Page 45 5 Inch Network High-definition Speed Dome User Manual Figure 4.5.1 Select WAN Connection Type Step2: Set the network parameters of the router as shown in Figure 4.5.2. The settings include IP address and subnet mask. Figure 4.5.2 Set Network Parameters Step 3: Set the port map in the virtual severs of Forwarding.

  • Page 46: Appendix 1 Network Cable Connection

    5 Inch Network High-definition Speed Dome User Manual Appendix 1 Network Cable Connection Materials and Tools Required Use an 8-pin twisted pair (within the effective transmission distance of 100m), two standard RJ45 plugs and a RJ45 special tool to process the network cable. A network cable tester is recommended to prepare for testing the produced network cable.

  • Page 47: Appendix 2 Lightning & Surge Protection

    5 Inch Network High-definition Speed Dome User Manual Appendix 2 Lightning & Surge Protection This product adopts TVS plate lightning protection technology to avoid damage caused by pulse signal that is below 3000W, like instantaneous lighting, surging, etc. According to the actual situation outdoors, necessary protection measures must be taken to secure the electrical safety.

  • Page 48: Appendix 3 Rs485 Bus Connection

    5 Inch Network High-definition Speed Dome User Manual Appendix 3 RS485 Bus Connection   1. General Property of RS485 Bus According to RS485 industry bus standard, RS485 is a half-duplex communication bus which has 120Ω characteristic impendence, the maximum load ability is 32 payloads (including controller device and controlled device). 2.
  • Page 49 5 Inch Network High-definition Speed Dome User Manual Figure 3 4. Problems in the Practical Application Normally, users adopt star-shape connection method in construction, under this situation, the terminal resistors must be connected between two farthest devices (as Figure 4, 1# and 15#), but this connection method is not satisfy the requirement of the RS485 industry standard so that it will lead to some problems such as signal reflection, anti-jamming ability decline when the devices are faraway.
  • Page 50 5 Inch Network High-definition Speed Dome User Manual Figure 5 4. FAQ of RS485 Bus...

  • Page 51: Appendix 4 24Vac Wire Gauge & Transmission Distance

    5 Inch Network High-definition Speed Dome User Manual Appendix 4 24VAC Wire Gauge & Transmission Distance The following table has described the recommended max. distance adopted for the certain wire gauge when the 24VAC voltage loss rate is less than 10%. For the AC driven device, the maximum voltage loss rate allowable is 10%. For example, for a device with the rating power of 80VA which is installed at a distance of 35 feet (10m) away from the transformer, then the minimum wire gauge required is 0.8000mm.

  • Page 52: Appendix 5 Table Of Wire Gauge Standards

    5 Inch Network High-definition Speed Dome User Manual Appendix 5 Table of Wire Gauge Standards...

Table of Contents