Control Terminal Programming Examples; International/North American Default Parameter Settings - GE AF-600 FP Series Design And Installation Manual

About Programming
5.3 Control Terminal Programming
Examples
Control terminals can be programmed.
•
Each terminal has specified functions it is capable
of performing
•
Parameters associated with the terminal enable
the function
See Table 2.6 for control terminal parameter number and
default setting. (Default setting can change based on the
selection in K-03 Regional Settings.)
The following example shows accessing Terminal 18 to see
5 5
the default setting.
1. Press [Main Menu] twice, scroll to Parameter Data
Set and press [OK].
Illustration 5.9 AN-15 Terminal 53 High Ref./Feedb. Value
2. Scroll to parameter group E-## Digital In/Out and
press [OK].
Illustration 5.10 Digital In/Out
3. Scroll to parameter group E-0# Digital Inputs and
press [OK]
4. Scroll to E-01 Terminal 18 Digital Input. Press [OK]
to access function choices. The default setting
Start is shown.
36
TM
AF-600 FP Design and Installation Guide
Illustration 5.11 Digital Inputs
5.4 International/North American Default
Parameter Settings
Setting K-03 Regional Settings to [0] International or [1]
North America changes the default settings for some
parameters. Table 5.1 lists those parameters that are
effected.
Parameter
K-03 Regional
Settings
P-07 Motor Power
[kW]
P-02 Motor Power
[HP]
F-05 Motor Rated
Voltage
F-04 Base
Frequency
F-53 Maximum
Reference
F-54 Reference
Function
F-17 Motor Speed
High Limit [RPM]
See Note 3 and 5
F-15 Motor Speed
High Limit [Hz]
See Note 4
F-03 Max Output
Frequency 1
H-73 Warning
Speed High
E-24 Function Relay Alarm
AN-15 Terminal 53
High Ref./Feedb.
Value
DET-768b
International North American
default parameter default parameter
value value
International North America
See Note 1 See Note 1
See Note 2 See Note 2
230 V/400 V/575 V 208 V/460 V/575 V
50 Hz 60 Hz
50 Hz 60 Hz
Sum External/Preset
1500 PM 1800 RPM
50 Hz 60 Hz
100 Hz 120 Hz
1500 RPM 1800 RPM
No alarm
50 60