Control Terminal Types - GE AF-600 FP Series Design And Installation Manual

Installation
Illustration 2.14 Control Wiring Access for IP55/ Nema 12 and
IP66/Nema 4X

2.5.8.2 Control Terminal Types

Illustration 2.15 shows the removable frequency converter
connectors. Terminal functions and default settings are
summarized in Table 2.6.
Illustration 2.15 Control Terminal Locations
•
Connector 1 provides four programmable digital
inputs terminals, two additional digital terminals
programmable as either input or output, a 24 V
TM
AF-600 FP Design and Installation Guide
•
•
•
•
•
See 13.2 General Technical Data for terminal ratings details.
Terminal Parameter
12, 13
18
19
32
33
27
29
20
39
42
DET-768b
DC terminal supply voltage, and a common for
optional customer supplied 24 V DC voltage
Connector 2 terminals (+)68 and (-)69 are for an
RS-485 serial communications connection
Connector 3 provides two analog inputs, one
analog output, 10 V DC supply voltage, and
commons for the inputs and output
Connector 4 is a USB port available for use with
the frequency converter
Also provided are two Form C relay outputs that
are in various locations depending upon the
frequency converter configuration and size
Some options available for ordering with the unit
may provide additional terminals. See the manual
provided with the equipment option.
Terminal Description
Digital Inputs/Outputs
Default
Setting
- +24 V DC
E-01 [8] Start
E-02 [0] No
operation
E-05 [0] No
operation
E-06 [0] No
operation
E-03 [0] No
operation
E-04 [14] JOG
-
Analog Inputs/Outputs
-
AN-50 Speed 0 -
High Limit
2
Description
24 V DC supply
voltage. Maximum
output current is 200
mA total for all 24 V
loads. Useable for
digital inputs and
external transducers.
Digital inputs.
Selectable for digital
input and output.
Default setting is
input.
Common for digital
inputs and 0 V
potential for 24 V
supply.
Common for analog
output
Programmable analog
output. The analog
signal is 0-20 mA or
4-20 mA at a
maximum of 500 Ω
21
2