System Start Up - GE AF-600 FP Series Design And Installation Manual

Start Up and Functional Tes...

3.7 System Start Up

The procedure in this section requires user-wiring and
application programming to be completed. is intended to
help with this task. Other aids to application set-up are
listed in 1.3 Additional Resources. The following procedure
is recommended after application set-up by the user is
completed.
CAUTION
MOTOR START!
Ensure that the motor, system and any attached
equipment is ready for start. It is the responsibility of the
user to ensure safe operation under any condition. Failure
to do so could result in personal injury or equipment
damage.
1. Press [Auto].
2. Ensure that external control functions are
properly wired to the frequency converter and all
programming is completed.
3. Apply an external run command.
4. Adjust the speed reference throughout the speed
range.
5. Remove the external run command.
6. Note any problems.
If warnings or alarms occur, see 10 Warnings and Alarms for
resetting the frequency converter after a trip..
TM
AF-600 FP Design and Installation Guide
DET-768b
3 3
29