Table of Contents
Advertisement
Attention!
The topology of the ground wires must be done in the right way (according state of art).
2.3
Connecting of the plug
Attention!
Be sure that the grounding of the reader is well done and the power supply is not connect-
ed(chapter 3.2). Otherwise the electronic may be destroyed by electrostatic discharge (ESD).
1
B
2
A
Figure 1: connecting the plug
Put on the sealing 2 to the SAB Cab (A).
Plug in the SAB Cab to the connector at the bottom of the reader device (B).
There is only one way to plug in the SAB Cab to the connector rim of the reader.
Fasten the SAB Cab with the help of the screws.
To meet the protection class of IP 65, it's necessary to apply a turning moment of 0.5 Nm to the
screws.
--------------------------------------------------------------------------------5/20--------------------------------------------------------------------------------
Advertisement
Table of Contents
