Advertisement
Quick Links
Advertisement
Related Manuals for AEG AMP 4/8
Summary of Contents for AEG AMP 4/8
- Page 1 Antenna multiplexer AMP 4/8 Short installation guide...
- Page 2 Power supply The AMP 4/8 needs 9..30 V/DC. Be sure that the SAB cap is mounted rightly when you switch on the power supply. Do never remove the SAB cap when the power supply is active. Otherwise the elec- tronic can be damaged.
- Page 3 AEG ID AMP 4 V1.408<CR> Initialization with default values This command initializates the AMP 4/8 with the default values. You have to save the settings with the command “VSAVE” if you want to make the values available after reboot. instruction: INIT <CR>...
- Page 4 The available baudrates are: 4800 9600 19200 38400 Warmstart with saved parameters With this command the AMP 4/8 restarts with the saved parameters. instruction: RST <CR> answer: <CR> Startup and testing the AMP 4/8 Connect the reader via cable with the serial interface (COM) from your notebook or pc.
- Page 5 Hotline If there are questions or suggestions please call the hotline: Sales und Marketing: +49 (0)731-140088-0 Fax: +49 (0)731-140088-9000 e-mail: sales@aegid.de http://www.aegid.de Revisions 25.01.10 Revision 00: Initial revision 10.12.10 Revision 01: Information to power supply added 17.02.11 Revision 02: Information to clean ground added --------------------------------------------------------------------------------5/5--------------------------------------------------------------------------------...