System Overview; Controlling Via Rs232/Usb (Mode 1) - AEG AMP 4 Installation Manual

5

System overview

The complete reading system contains the AMP 4/8 and the reader ARE i2.
There a 3 different modes to use the AMP 4/8:

Mode 1: RS232/USB communication

Mode 2: communication via the ARE i2

Mode 3: binary controlling via the digital in puts
5.1

Controlling via RS232/USB (mode 1)

power supply (e.g. PC connection
The typical sequence in mode 1 is as follows:
1. Using the RS232 interface of the AMP 4/8
--------------------------------------------------------------------------------14/20--------------------------------------------------------------------------------
antenna 1
AEG
AMP 4/8
antenna 2
.
Vcc
1
.
2
4
.
8
antenna 8
RS232/USB
+
cable for AMP / RS232)
Figure 2: system overview controlling via RS232/USB (mode 1)
VER<CR> -> version query of the AMP 4/8 (e.g. "AMP 8 V3.012")
MP2<CR> -> switching to antenna channel 2
antenna connection
ID AEG ID
ARE i2
L1
L2
L3
L4
L5
power supply (e.g. PC
connection cable)
SAB-cap
RS232/USB
+