Makita PM7650H Technical Information page 7

Petrol mist blower

Hide thumbs Also See for PM7650H:

Table of Contents

epair

[4] DISASSEMBLY/ASSEMBLY

[4]-5. Recoil complete, Engine cover, Fuel tank (cont.)

DISASSEMBLING

(3) Remove the fuel tubes of Tube assembly from Carburetor and Primer pump. (Fig. 15)

(4) Remove Fuel tank from Frame complete by unscrewing three M6x12 Pan head screws. (Fig. 16)

Fig. 17

Fig. 15

Primer pump

Transparent blue

fuel tube of

Tube assembly

ASSEMBLING

Assemble by reversing the disassembly procedure.

Note:

• When connecting the fuel tubes of Tube assembly to

Carburetor and Primer pimp, do not confuse them.

Be sure to connect the black one to Carburetor and

the transparent blue one to Primer pump. (Fig. 15)

• When mounting Engine cover, be careful not to bend

nor pinch the breather pipe. (Fig. 17)

• Do not forget to pass the fuel tubes of Tube assembly

through the slit of Engine cover. (Fig. 18)

Fig. 18

Engine cover,

viewed from the rear

slit of Engine cover

Breather pipe

Carburetor

Black fuel tube

of Tube assembly

Tube assembly

Fig. 16

M6x12 Pan head screw (3 pcs)

P 7/26

Fuel tank

Table of Contents