Honeywell CIU 888 Sealing Manual page 7

Hide thumbs Also See for CIU 888:

CHAPTER 1 SEALING THE CIU 888

FIGURE 1-1

Part No.: 4417595_Rev10

Table of Contents

The procedure for sealing the CIU 888 consists of the following steps:

1. Unlocking the configuration settings of the CIU 888, see section 1.1

2. Verifying the W&M relevant configurations settings of the CIU 888,

see section 1.2

3. Sealing the Entis Pro system connected to the CIU 888, see

section 1.3

4. Calibrating the entities of the tanks associated with the CIU 888, see

section 1.4

5. Locking the W&M relevant configuration settings of the CIU 888, see

section 1.5

6. Sealing the CIU 888, see section 1.6

1.1 Unlocking the configuration settings of the CIU 888

The first step in the procedure for sealing the CIU 888, is unlocking both

the W&M relevant and the non-W&M relevant configuration settings of

the CIU 888. The configuration settings of the CIU 888 can be unlocked

using the W&M lock key switch and the Configuration lock key switch

located at the front of the CIU 888 (see FIGURE 1-1).

CIU 888: W&M lock key switch (left) and Configuration lock key switch (right)

To unlock the configuration settings, insert the key in the key switch and

turn it clockwise. The status of the W&M lock key switch and the

Sealing Guide

CIU 888