Honeywell CIU 888 Sealing Manual page 3

Part No.: 4417595_Rev10
Preface
PREFACE
General
A sealing facility of systems that is needed to ensure the accuracy of
settings used for calculating volume/mass must not be allowed to be
changed undetected. After verification by a legal metrology authority
(e.g. NMi), the system settings of the CIU 888 can be locked and the
system can be sealed by the authorized representative. By sealing the
CIU 888, the W&M authority states that the settings are conform the
national/local certifications, and that the system is allowed to be used to
support W&M certified applications for custody transfer, accounting and
duties.
Purpose of this manual
The purpose of this manual is to provide information about sealing the
CIU 888.
Target audience of this manual
This manual is primarily intended for:
Representatives of the W&M authorities who are responsible for

sealing the CIU 888
W&M accredited users who are responsible for sealing the CIU 888

Service technicians who are responsible for commissioning and

configuring the CIU 888, and who may need to break the seal of the
CIU 888 in order to change the configuration settings
Other users who may need to break the seal of the CIU 888 in order

to change the configuration settings
Sealing Guide
CIU 888 i