Panasonic MICRO-IMAGECHECKER AX40 User Manual page 267

Restoring a Memory Image
With this feature, you can import the memory images saved on a CF card that were backed up from AX40
into the AX40 memory. In the same way, you can also import the images saved with the Image Save
function that were backed up on a CF card into the AX40 memory.
1. Select "CARD" from the menu bar in SETUP mode.
The menu is displayed
2. Select "Restore".
The subwindow is displayed.
If the following message appears, make sure to check if the CF card is surely inserted
E0220 CF card is not inserted.
3. Highlight "Image", press the ENTER key, and then specify the folder number (01 to 99) of the
desired folder.
Only the numbers of the folders saved in the CF card are shown.
4. Specify the folder number and press the ENTER key.
Restoring of the memory image starts. It is completed after the menu disappears.
For Camera 1, even if multiple image files saved in the source folder, an image data
"Image00001.bmp" will be restored in both Memory 1 and Memory 2.
259