Panasonic MICRO-IMAGECHECKER AX40 User Manual page 2

Before Reading This Manual
Thank you for purchasing the MICRO-IMAGECHECKER AX40.
In this manual, information on the hardware (installation, wiring, etc.) and the software (functions, setting
procedures, etc.) is described. Read this User's Manual carefully before you start using the machine.
Refer to the separate documentation provided for this machine, Use's Manual (Color Extraction), for details
of color extraction.
Safety Precautions
To ensure that you use this machine correctly, read this User's Manual thoroughly before using the
machine. Make sure that you fully understand the machine and information on safe.
Conventions used in the Safety Precautions
Symbols:
The following symbols used in Safety Precautions.
Symbol Explanation:
WARNING
This indicates the existence of a hazard that could result in death of or serious damage to the operator, if
the safety instruction is not observed.
CAUTION
This indicates the existence of a hazard that could result in serious bodily injury or property damage, if
the safety instruction is not observed.
WARNING
• Use the product within its specified ratings and environmental conditions. Failure to do so might result
in abnormal heat and smoke coming from the product.
• Do not use the product in the environment where combustible gas presents. This might cause
explosion.
• Do not throw the product into fire. This might cause the batteries and electronic parts in the product to
explode.
CAUTION
• To prevent abnormal heat and smoke coming from the product, do not make the product operate up
to the limits of guaranteed features and performance.
• Never attempt to disassemble or alter the product. Failure to do so might result in abnormal heat and
smoke coming from the product.
• Surely connect the wires and connectors. Failure to do so might result in abnormal heat and smoke
coming from the product.
• Do not touch the terminals while the power is ON. This might result in an electric shock.
• Do not install (connect or disconnect) the product while the power is ON. This might result in an
electric shock.
• Do not allow liquid, combustible materials or metallic objects to come into the product. Failure to do
so might result in abnormal heat and smoke coming from the product.