Zfl (Single Arm Type, Double Arm Type) - Yamaha XY-X series User Manual

3. ZFL (single arm type, double arm type)

When using the 3rd-axis model with ZFL for the 3rd-axis, install the workpiece onto the
ZFL slider by using six M5 coarse thread tap holes and a φ 5 reamer hole opened on the
slider's workpiece installation surface. Use six M5 coarse thread tap holes on the side of
slider to fix light loads other than the tool, such as a wiring retainer. There is a step on the
top of the slider. Select the nominal length of the tool-fixing bolt so that the fitting length
of the screw fixing the tool is 8mm or more, 12mm or less.
(Tolerance between knock (0.02)
9
c
CAUTION
If the bolt fi tting length is 12mm or more from the installation surface, the bolt will
contact the bottom.
110
100
2- 5H7 Depth15
6-M5x0.8 Depth12
9
3. ZFL (single arm type, double arm type)
10
Stroke cover
6-M5x0.8 Depth 9
4-3
Chapter
4