Sony PCM-D100 Help Manual page 248

Help Guide | Recording with high signal-to-noise ratio (S/N 100dB)
Help Guide
How to Use
Linear PCM Recorder
PCM-D100
Back Back to Top
Recording with high signal-to-noise ratio (S/N 100dB)
With two A/D converters for one channel, the linear PCM recorder always reserves audio
for the digital limiter, which is 12 dB lower than audio processed in the normal circuit. If
over-input occurs while the S/N 100dB function is enabled, the recorded data from the
point when the over-input starts is replaced. The S/N 100dB function achieves a high S/N
ratio by replacing two different leveled A/D converters with holding linearity. With the S/N
100dB function, you can record with low noise even with a low recording level.
1. Press and hold the HOME/BACK button for more than 1 second, select "
Settings" - "Recording Settings" - "S/N 100dB," and then press the
2. Press
3. Press and hold the HOME/BACK button to return to the HOME menu.
Descriptions of menu items
Select one of the following menu items.
file:///C/...ers/1000025409/Desktop/HTML_PDF%20Files/Help_4475418131_PCMD100_EN/4475418131.w/en/contents/TP0000225998.html[8/1/2019 8:22:04 AM]
or to select "ON," and then press the
button.
button.
Print
243