Transfer Calls - Cisco 8832 Quick Start Manual

Activate Call Forward All with Feature Activation Code Synchronization
Step 3
Click Submit All Changes.
Activate Call Forward All with Feature Activation Code Synchronization
Your administrator enables a feature activation code that synchronizes the phone with the server to forward
all calls. When you activate the feature on the phone, you see a call forwarding
of the phone screen.
Note The Feature Activation Code Synchronization feature only supports Forward all. Forward busy and Forward
no answer are not supported.
Procedure
Step 1 Press Forward.
Step 2
Do any of the following:
• Enter the target number, to which you want to forward incoming calls from this phone line.
• Press Contacts and select a contact from your contact directories.
• Press Recents and select an entry from the call history.
Step 3
Press Call to forward all calls to the specified number.
You can clear the call forward all service by pressing Clr fwd.

Transfer Calls

You can transfer an active call to another person.
Transfer a Call to Another Person
When you transfer a call, you can stay on the original call until the other person answers. This gives you an
opportunity to talk privately with the other person before you remove yourself from the call. If you don't want
to talk, transfer the call before the other person answers.
Calls
8
If your administrator disables the feature key synchronization (FKS) and XSI sync for call forwarding
on your phone, you can enter the value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) or XSI sync for call forwarding on your
phone, you can enter the value as number of rings after which call needs to be forwarded.
The call forwarding settings on the phone web page take effect only when FKS and XSI are disabled.
For more information, consult your administrator.
Calls
icon displayed at the top