Cisco 8832 Quick Start Manual page 11

Calls
• Do Not Disturb
• Offline
For more information on the "UC-One Communicator" service, see the Broadsoft documentation.
Make a Call to an IM and Presence Contact
When you call someone on your IM&P contacts, their presence state is displayed in your call history.
Before you begin
You administrator enables the IM&P directory in the phone.
Procedure
Step 1 Press Contacts.
Step 2
Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select IM&P contacts.
Step 4
Select a directory.
Step 5 Select an entry.
The entry shows the status of your contact.
Step 6 (Optional) Press Detail to view the contact details and press Back to return to the contacts list.
Step 7
Press Call.
Change Your Presence State
Because the phone is always available, you need to set your presence manually on the phone.
Before you begin
You administrator enables the IM&P directory in the phone.
Procedure
Step 1 Press Contacts.
Step 2
Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select IM&P contacts.
Step 4
Highlight a directory. For example, Favorite, Non-Group, All contacts, and so on.
Step 5 Press Presence.
Step 6
Select your presence from the list.
• Available—You can take a call.
Make a Call to an IM and Presence Contact
Calls
11