Technical Data - AEG ITE42600KB User Manual

18 www.aeg.com
Problem
and a number come on.
You can hear a constant
beep noise.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the

9. TECHNICAL DATA

9.1 Rating plate
Model ITE42600KB
Typ 61 A2A 80 AD
Induction 2.8 kW
Ser.Nr. .................
AEG
9.2 Roasting zones specification
Roasting zone
Front
Rear
Possible cause
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
There is an error in the appli-
ance.
The electrical connection is
incorrect.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
PNC 949 597 551 00
220 - 240 V 50 - 60 Hz
Made in Germany
2.8 kW
Nominal power [W]
1400
1400
Remedy
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech-
nical data".
Deactivate the appliance
and activate it again after 30
seconds. If comes on again,
disconnect the appliance
from the electrical supply.
After 30 seconds, connect
the appliance again. If the
problem continues, speak to
an Authorised Service Cen-
tre
Disconnect the appliance
from the electrical supply.
Ask a qualified electrician to
check the installation.