AEG ITE42600KB User Manual page 12

12 www.aeg.com
The display blinks until the roasting zone
reaches the set temperature. Then a
signal sounds and the display shows the
temperature.
5.3 Timer
Count Down Timer
Use this function to specify how long a
roasting zone should operate during a
single cooking session.
Set the temperature for the appropriate
roasting zone and then set the function.
1. Touch
change the time.
The timer digits
and
red, and
If the timer is not set, all indicators
disappear after 4 seconds.
2. Touch
99 minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
, and
When the time comes to an end, a signal
sounds and
signal, touch
To deactivate the function: touch
indicators
to set
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
to activate the function or
and the indicators
come on the display.
turns white.
or to set the time (00 -
disappear. stays red.
blinks. To stop the
.
and come on. Use
on the display.
CountUp Timer (The count
up timer)
You can use this function to monitor how
long a roasting zone operates.
Touch
The indicator
starts to count up automatically.
To deactivate the function: touch
When the indicators light up, touch
Minute Minder
You can use this function when the
appliance is activated but the roasting
zones do not operate.
To see the control panel, place a pot on
a roasting zone.
1. Touch
red, to activate the function.
2. Touch
The function starts automatically after 4
seconds. The indicators
disappear.
When you set the function, you can
turns
remove the pot.
When the time comes to an end, a signal
sounds and
stop the signal.
To deactivate the function: touch
indicators
,
to set
The function has no effect
on the operation of the
roasting zone.
5.4 Lock
. The
or
You can lock the control panel while the
appliance operates. It prevents an
accidental change of the temperature.
You need to activate the
function for each appliance
separately.
Set the temperature first.
Touch
twice to activate the function.
turns red, the timer
, until the indicator
or to set the time.
,
stays red.
flashes. Touch
and light up. Use
on the display.
to activate the function.
.
.
turns
, and
to
. The
or