Cleaning Recommendations; Environmental Notice - Oral-B iO Manual

Store (SM) / Google Play™ or you may scan the
QR code in the front pages of this manual (g).
• Launch the Oral-B App. It will guide you
through the entire Bluetooth pairing proce-
dure. You may also find it under the App´s
settings (Settings -> Toothbrush).
Note: Oral-B App functionality is limited if
Bluetooth is deactivated on your smart-
phone (for directions please refer to your
smartphone's user manual).
• Pairing is indicted via a blue pulsing Smart
Ring light on your handle. Any App instruc-
tions will be displayed on your smartphone.
• You may change Bluetooth setting at any
time on your handle via the display -> Set-
tings -> Bluetooth activated/deactivated.
• Keep your smartphone in close proximity
(within 5m distance) when using it with the
handle. Make sure the smartphone is safely
positioned in a dry place.
Note: Your smartphone must support
Bluetooth 4.0 (or higher)/Bluetooth Smart in
order to pair your handle.
Compatible smartphones are listed in App
(SM)
Store or Google Play™.
Caution: Follow your smartphone's user man-
ual to ensure your phone/charger is designed
for use in a bathroom environment.

Cleaning recommendations

After brushing, rinse your brush head under
running water with the handle switched on.
Remove the brush head and clean the handle
and brush head separately. Make sure water
runs inside the top of the handle as well as
inside the brush head. Wipe all parts dry
before reassembling. Unplug the charger
before cleaning. Clean the charger regularly
with a damp cloth only. Please check individ-
ual cleaning instructions for each accessory in
its «Accessories» paragraph.
10
xxxxxxxx_OP020_NA_PreSeries.indd 10 xxxxxxxx_OP020_NA_PreSeries.indd 10
Accessories
(depending on model)
Charging Travel Case (f)
• To charge your handle (4) place it in the
charging travel case (f) and
• connect it to an electric outlet, using the
extra power supply (f2) provided. The
power supply may be used for all global
mains voltage ranges (100 – 240V).
• The flashing light (f1) of the charging travel
case indicates that the handle is charging.
Once the handle is fully charged the light
turns off. A full charge typically takes 6 hours.
• The outer and inner case should be cleaned
with a damp cloth only. Make sure that the
handle and brush head are completely dry
before storing in the travel case.
Note: Clean stains on travel case surface
immediately. Store travel case in a clean
and dry place.
Travel Case (e)
Store the clean and dry toothbrush/brush
heads in the travel case (e).
The outer and inner case should be cleaned
with a damp cloth only.
Note: Clean stains on travel case surface
immediately. Store travel case in a clean and
dry place.
Refill holder (d)/Refill holder with cap (c)
You may store your cleaned refills on the pins
of the refill holders. Make sure refills are dried
before closing the cap. Refill holders and cap
are dishwasher-safe.
Subject to change without notice.

Environmental Notice

Product contains batteries
and/or recyclable electric waste.
For environment protection do
not dispose in household waste, but for
recycling take to electric waste collection
points provided in your country.
Battery removal at the end of the product's
useful life
Do not disassemble the product except when
disposing of the battery. Run down battery
before removing. When taking out the battery
for disposal, use protective clothing (gloves,
20.11.19 13:03 20.11.19 13:03