Honeywell HVAC400x Applications Manual page 14

HVAC400X – APPLICATION MANUAL
Index Parameter
P1.12 Preset frequency 2
P1.13 Acceleration time 1
P1.14 Deceleration time 1
P1.15 Remote control place 0
P1.16 Automatic reset
P1.17 Motor switch
P1.18 PID Mini-Wizard *
P1.19 Pump and Fan
Cascade Wizard*
P1.20 Fire Mode Wizard **
P1.21 Start-Up Wizard **
* = The parameter is visible only on the graphical keypad.
** = The parameter is visible only on the graphical and the text keypad.
EN2B-0417GE51 R0719
Table continued: Quick Setup parameter group
Min Max Unit
0.00 50.00 Hz
0.1 3000.0 s
0.1 3000.0 s
1
0 1
0 1
0 1
0 1
0 1
0 1
Default ID Description
15.00 106 Select with the digital input: Preset
frequency selection 1 (P3.5.1.17)
(Default = Digital Input 5).
5.0 103 Indicates the quantity of time that is
necessary for the output frequency to
increase from zero frequency to the
maximum frequency.
5.0 104 Indicates the quantity of time that is
necessary for the output frequency to
decrease from the maximum frequency
to zero frequency.
0 172 The selection of the remote control
place (start/stop).
0 = I/O control.
1 = Fieldbus control.
0 731 0 = Disabled.
1 = Enabled.
0 653 0 = Disabled.
1 = Enabled.
0 1803 0 = Disabled.
1 = Enabled.
See
0 0 = Disabled.
1 = Enabled.
See
Wizard.
0 1672 0 = Disabled.
1 = Enabled.
0 1171 0 = Disabled.
1 = Enabled.
14
2.1 PID Mini-Wizard.
2.2 Pump and Fan Cascade Mini-