Adding A Scanning Profile; Using Scan Demo To Decode A Bar Code - Honeywell Dolphin 75e User Manual

Setting
Vibrate Enabled

Adding a Scanning Profile

To create a scan setting profile for a custom app on the terminal:
1. Touch All Apps > Settings
2. Touch Ring Scanner.
3. Touch the plus sign (+) in the upper right corner of the App Profiles screen.
4. Select the custom app from the Target App list. The profile appears on the App Profiles screen list. You can now select and
modify the scan settings of the new profile.

Using Scan Demo to Decode a Bar Code

Scan Demo demonstrates the functionality of the ring scanner and is not intended as a functional business solution. Detailed
information on how to create custom applications for your Dolphin terminal is provided in the Software Development Kit (SDK),
available for download at www.honeywellaidc.com.
1. Touch All Apps > Demos
2. Point the ring scanner at the bar code. For optimum performance, avoid reflections by scanning the bar code at a slight
angle.
3. Press the trigger. Center the aimer over the bar code (see
4. The bar code is decoded and the results appear on the screen.
Decode Results
Touch the dots or swipe left or
right to scroll through the
decode results of past scans.
4 - 6
Description
Enable or disable vibrate along with Good Read or Bad Read
notifications.
> Scanning.
> Scan Demo to open the Scan Demo application.
Aiming Beam on page 4-2).
Default Value
Disabled
Scan Statistics
See Configuring the Scan Demo
Application on page 4-7.