Change The Screen Lock To Protect The Computer; Select A Touch Screen Profile To Optimize Performance - Honeywell CT40 User Manual

Change the Screen Lock to Protect the Computer

After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer after the screen lock activates,
unless they input the correct password, pin, or pattern.
The recommended setting for the Screen Lock is to enable a Password lock. Use a
strong password value (e.g., include numbers, characters, special characters, and
mix character case).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Choose one of the following options:
4. Follow the on-screen prompts to complete the setup.
5. Exit the Settings app.

Select a Touch Screen Profile to Optimize Performance

Optimize screen interactions by selecting a touch screen profile designed
specifically for your use case. For example, if you wear gloves, set the touch screen
profile to Glove use enhanced for the best touch screen response.
Note: Maximum glove thickness of 2 mm (0.08 inches) for touch screen response.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Touch Screen Profile.
3. Choose one of the following options:
4. Exit the Settings app.
CT40/CT40 XP Mobile Computer Series User Guide
> Security > Screen lock.
• None
• Swipe
• Pattern
• PIN
• Password
• Normal mode
• Finger enhance mode
• Glove enhance mode
• Stylus enhance mode
• Protector mode
17