Connect The Ring Scanner (Optional); Attaching The Ring To Your Finger; Trigger Rotation - Honeywell Dolphin 75e User Manual

Connect the Ring Scanner (Optional)

1. Slide the ring scanner cable connector into the bottom of the sled until the
connector ring clicks shut.
It is not necessary to remove the ring scanner from the sled before remov-
ing the Dolphin 75e from the sled.
2. When connected to the Dolphin 75e that is powered up, the terminal
beeps emits 3 beeps and the ring scanner LED blinks green one time. The
scanner is ready to scan.

Attaching the Ring to your Finger

1. Remove shipping film off the scanner window.
2. Slide finger into loosened ring strap.
3. Pull ring strap to secure ring to finger.
Note: If using the C-ring simply slide on to finger.
The ring scanner has a built-in quick disconnect designed for occasional safety hazards. It is not intended for frequent, nor-
mal removal of the ring scanner from the hand.
Do not touch, push against or brace your finger on the scan aperture at any time.

Trigger Rotation

The scanner head can be rotated 180° to be work on the right or left hand.
2 - 9