Symbology Settings; Imager Settings; Trigger Settings; Notification Settings - Honeywell Dolphin 75e User Manual

Symbology Settings

The Symbology Settings specify how bar codes are decoded during scanning. Symbologies with a check mark to the right
are enabled. To enable or disable a symbology, touch the check box. Select a symbology name from the list to access con-
figuration parameters specific to the symbology type. Swipe up or down to scroll up or down the list of available symbolo-
gies.
Check the box to
enable a symbology.

Imager Settings

The Override Recommended Values setting is disabled by default. The recommended Imager Settings are designed to
work in a wide range of environments and should not normally need to be modified.

Trigger Settings

Setting Description
Decode Timeout Scanning will automatically turn off after this number of seconds if the
scan trigger is held and nothing has successfully decoded.

Notification Settings

Setting Description
Good Read Enable or disable a good read notification.
Notification The notification includes a short green blink of the scan LED, a short beep
tied to the system volume, and optionally a short vibration.
Bad Read Enable or disable notification of a failed scan.
Notification The notification includes a short red blink of the scan LED, an error beep
tied to system volume, and optionally a short vibration.
Touch the code type to access the
advanced symbology settings.
Default Value
20
Default Value
Enabled
Disabled
4 - 5