Appendix 1-4 Cable And Connector Assembly; Appendix 1-4-1 Cm10-Sp**S Plug Connector - Mitsubishi Electric MELDAS MDS-R Series Technical Specification And Instruction Manual

Appendix 1-4 Cable and connector assembly

Appendix 1-4-1 CM10-SP**S plug connector

This section explains how to assemble the wire to CM 10 angle plug connector.
(1) Cutting a cable
Cut the cable to the following dimensions:
* Cable length after cutting = CM10 - SP**S：35mm + cable length
(2) Inserting parts
Insert the clamp nut, cable clamp, bushing and back shell in to the cable.
(Note) Take care not to insert them upside down
Back shell
(3) Stripping a cable
Strip the cable to a length 20mm.
Strip the core wire to a length 6mm.
Core wire
Appendix 1. Cable and Connector Specifications
= 35mm + cable length
Bushing
20
6
A1 - 13
Cable length
Cable clamp
Clamp nut
Sheath
Cable