NEC SL2100 Features And Specifications Manual page 224

Hide thumbs Also See for SL2100:
Table of Contents

Advertisement

SL2100
Single Line Telephone
1.
Hang up.
If you are not permitted to use Tandem Trunking, outside callers may hear Music on Hold.
To exit a Conference when all conference members are outside parties without
affecting the other parties:
Multiline Terminal
1.
Press Hold key.
2.
Dial #8.
C
3.
Hang up.
Single Line Telephone
1.
Hookflash and dial #8.
2.
Hang up.
To Barge-In to Conference Call:
1.
Pick up the handset or press Speaker key and dial the service code (default = 710).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the
system automatically places a Callback to the extension.
2.
Dial the extension number or press a DSS key of a telephone within a Conference call.
When a new call is added to the conference, an intrusion tone is heard by all parties in the
Conference, depending on system programming, and all display Multiline Terminals show the joined
party. If a Conference is not possible:
• the extension user hears a warning tone
• the DISA user is rerouted to the defined ring group
- OR -
The following steps are not available for DISA:
1.
Dial the extension number of the internal party.
2.
Dial the single digit service code, if programmed.
Instead of the single digit service code, the service code 710 can also be dialed at this point.
To Transfer a Call into a Conference:
1.
While on a call, press Hold key.
2.
Dial the Transfer to Conference service code (PRG 11-12-58, default = 624).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the
system automatically places a Callback to the extension.
The display shows the line Number, Number/Name and Extension Name/Number.
1-210
ISSUE 1.0
Conference

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF