NEC SL2100 Features And Specifications Manual page 289

ISSUE 1.0
Making an External Page using your DSS Console (Needs to set at 30-03):
1. Press the DSS Console External Page zone key (1~3).
If the zone you want is busy, try again later.
If you do not have Handsfree, lift the handset to make your announcement.
When the DSS key is...
Making an Internal Page using your DSS Console (Needs to set at 30-03):
1. Press the DSS Console Internal Page zone key (Group key 1~50).
If the zone you want is busy, try again later.
If you do not have Handsfree, lift the handset to make your announcement.
When the DSS key is...
Switching the Night Service mode from your DSS Console (Needs to set at 30-03):
1. Press the Night Service key.
When this key is ON...
NIGHT 2
Using a DSS Console key as a One-Touch or Programmable Function key:
A user can have DSS Console keys programmed as One-Touch keys. These keys can be used for Direct
Station Selection, Trunk Calling, Personal Speed Dial, Speed Dialing, and Service Code access. The stored
service code cannot be longer than three digits.
1. Press the DSS Console key for function.
For example, you can forward your calls by pressing the DSS key + dial 1 + destination. Your the
DSS key must have been previously programmed for Call Forward.
Features and Specifications Manual
External Page Busy Lamp Field
On
Off
Internal Page Busy Lamp Field
On
Off
Night Service Busy Lamp Field
DAY
NIGHT
BREAK
The External Page zone is...
Busy
Idle
The Internal Page zone is...
Busy
Idle
The system is in the...
Day 1 Mode
Night 1 Mode
Break 1 Mode
Night 2 Mode
SL2100
D
1-275