NEC SL2100 Features And Specifications Manual page 440

SL2100
Guide to Feature Programming
Program
No.
11-07-01 Department Group Pilot Numbers - Extension
Group Pilot Number
45-01-01 Voice Mail Integration Options - Voice Mail De-
partment Group Number
I
15-03-01 Single Line Telephone Basic Data Setup - SLT
Signaling Type
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
16-02-01 Department Group Assignment
Operation
Cold Start
1. Turn SL2100 power off.
2. Once the system has powered down, push in and hold the Load button.
3. Turn SL2100 power on.
4. Continue holding the Load button for approximately three seconds or until ALM LED (red) lights.
5. Release the Load button.
6. Programming changes are made automatically.
1-426
Program Name Input Data
Dial (Up to 8 digits)
0 = No Voice Mail Assigned
1 ~ 50 = Department Group 1 ~
50
0 = DP
1 = DTMF
0 = Normal
1 = Special
1 ~ 50
If department group 50 al-
ready used, InMail auto set-
ting does not function.
ISSUE 1.0
Default
Group Number 1-49 :
Pilot Number
3101-3149
Group Number 50 : Pi-
lot Number 3999
Group Number 1-49 :
Pilot Number is No Set-
ting
Department Group 50
Extensions 213 ~ 228 =
Dial Pulse (0)
Other Extensions =
DTMF (1)
Extensions 213 ~ 228 =
Special (1)
Other Extensions =
Normal (0)
Extensions 213 ~ 228 =
50
Other Extensions =
Group 1
InMail-Auto Setting