NEC SL2100 Features And Specifications Manual page 65

ISSUE 1.0
Call Routing - Inbound Analog Trunk
Program Program Name
No.
22-01-04 Incoming call System options - Normal, DIL in-
coming call no answer Timer
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
22-05-01 Incoming Trunk Ring Group Assignment - In-
coming Group Number
22-07-01 DIL Assignment - Number of Transferring Desti-
nation
22-08-01 DIL/IRG No Answer Destination - Incoming Ring
Group Number
Call Routing - Inbound (DID)
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program Program Name
No.
22-01-06 System Options for Incoming Calls - DID Ring-
No-Answer Time
22-01-07 System Options for Incoming Calls - DID Incom-
ing Ring Group No Answer Time
22-02-01 * Incoming Call Trunk Setup - Trunk Service Type
22-11-01 * DID Translation Table - Received Number
22-11-02 * DID Translation Table - Target Number
22-11-04 DID Translation Table - Transfer Operation Mode
Features and Specifications Manual
Input Data
0 ~ 64800 seconds
0 = No Overflow
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0 = No Setting
01 ~ 50 = Incoming Ring group
102 = VM
103 = Centralized VM
Maximum of 8 digits (0 ~ 9, * , #)
0 = No Setting
01 ~ 50 = Incoming Ring group
102 = VM
103 = Centralized VM
Input Data
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
Maximum eight digits
(0 ~ 9, , #)
*
Maximum of 8 digits (0 ~ 9, * , #,
@)
0 = No Transfer
1 = Busy
2 = No Answer
3 = Busy/No Answer
SL2100
Default
0
0
A
1
No Setting
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
Default
20
20
0
Refer to Programming
Manual.
Refer to Programming
Manual.
0
1-51