Siemens SINUMERIK 840D sl Series Diagnostics Manual page 607

Hide thumbs Also See for SINUMERIK 840D sl Series:
Table of Contents

Advertisement

08/2005
Remedy:
--
120000
Area %1 cannot be loaded! Acknowledge alarm, press area switchover key!
Parameters:
%1 = Operating area name
Definitions:
One of the applications listed in the REGIE.INI could not be started.
Reactions:
- Alarm display.
Remedy:
Check whether the entry in REGIE.INI is correct.
Program Con-
Internal
tinuation:
120001
Area %1 cannot be selected. Please deactivate area %2
Parameters:
%1 = Operating area name
%2 = Operating area name
Definitions:
Within the scope of an area switchover, a different area is to be terminated (unloaded).
However, the area refuses this.
The area switchover does not take place.
Reactions:
- Alarm display.
Remedy:
Try again and, if possible, close the reluctant area first.
Program Con-
Internal
tinuation:
120002
Area %1 is still active. Please deactivate area %1
Parameters:
%1 = Operating area name
Definitions:
When the MMC system is closed (closing the master control), an area is to be termi-
nated.
However, the area refuses this.
The system was NOT closed.
Reactions:
- Alarm display.
Remedy:
Try again and, if possible, close the reluctant area first.
Program Con-
Internal
tinuation:
120003
Area %1 cannot be deactivated. Please try again
Parameters:
%1 = Operating area name
Definitions:
Within the scope of an area switchover, an area is to be deselected.
However, the area refuses this.
The area switchover does not take place.
Reactions:
- Alarm display.
Remedy:
Try again and, if possible, close the reluctant area first.
Program Con-
Internal
tinuation:
120005
Please acknowledge the dialog box in area %1
Parameters:
%1 = Operating area name
Definitions:
The area %1 could not be deselected, as in this area a dialog box is still open.
Reactions:
- Alarm display.
Remedy:
Close the dialog box in area %1!
Program Con-
Internal
tinuation:
120006
The channel switchover is currently disabled by area %1.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-607

Advertisement

Table of Contents
loading

Table of Contents

Save PDF