Setting According To Your Preferences - Panasonic Windea VGDT18143W Simple Manual

Setting item Setting content
Return Home
Sets if the linked operation of "return home notification
to home" is performed together with the unlocking of
Notification Setting
the main entrance with the ID authentication device.
(ID authentication key)
Return Home
Sets if the linked operation of "return home notification
Notification Setting
to home" is performed together with the unlocking of
(Private Security
the main entrance with the private security number.
Number Setting)
Sets if the linked operation of "return home notification
to home" is performed together with the calling from
the unit entrance by pressing and holding the call
button of the door phone..
Return Home
Return home notification Setting (door phone
Note
Notification Setting
notification) is not displayed when set to "The door
(Door Phone Notification)
phone connection: Without camera" or "The door
phone connection: Without camera (3 lines) in the
installation setting. (Consult with the management
company or the company that installed the system.)
Sets the time zone not to accept the return home
Mute Setting
notification.
Sets the name of the call sub-base unit
Setting is possible when set to "Call sub-base unit 1
Note
connection or call sub-base unit 2 connection: Call
sub-base unit with monitor or call sub-base unit" with
Extension Setting
the installation setting. "Extension Setting" does not
appear when both "Call sub-base unit 1 connection"
and "Call sub-base unit 2" ae set to "Not connected".
(Consult with the management company or the
company that installed the system.)
Sets the language for the screen display and audio
Language
guidance to either Japanese or English.
Private Security
Sets thesecurity number for individual authentication
Number Setting
to unlock the main entrance.
(*1)
Setting this setting to "On" will set "Ringtones volume
settings: Extra-High", "Ringtone (number of rings):
Ring Continuously", "Yuttari Talk: On", "Received call
time: 60 sec." and "Talk volume: High". The setting
Senior Mode Setting
value for each setting item will not
Return to original even when set to "No" when used
Note
in the Senior mode. Change the setting value in each
setting item.
Eject Operate this to eject the microSD memory card.
Record Save
Sets the save destination of the visitor recording
(video, sound).
Destination
Initialize Operate this to initialize the microSD memory card.
Sets if turning on/off the lighting for door phone
( · ) is performed automatically or
Light ON Light OFF
Extension Light
manually when viewing around the unit entrance (door
Setting
phone with camera) when a call is received or during
talking.
92
Initial setting Page
Off
Off
110
to
112
Off
21:00 to 07:00
Call sub-base unit 1:
Room 1
113
Call sub-base unit 2:
Room 2
114
Japanese
Off
115
No
116
—
117
to
Main unit
118
—
Manual 119

Setting According to Your Preferences

Setting item Setting content
Sets the volume of the earthquake notification when
an earthquake occurs.
Earthquake
●
The call sub-base unit with monitor will sound in
Note
Setting
(*1) the volume set in the base unit.
● Volume of the call sub-base unit is not adjusted.
Volume is equivalent to "High".
Registers smartphones etc. to the mobile device
Mobile Device
adapter.
Registration
Mobile Device Confirms the state of the mobile device adapter and
Information device information.
Delete All Deletes the registration of smartphone, etc., registered
Mobile Device in the mobile device adapter.
Charging
Sets if start of the EV charging is notified or not.
Start Notification
Setting Deletes all the user setting data and returns to
Initialization the initial state.
Initializes the visitor information, management information,
recorded announcements that are recorded in the save
destination selected in the record save destination in the
SD Card Setting. All the visitor records, etc., are erased
Delete
when delete recorded data is performed.
Recorded Data
Protected visitor records, etc., are not deleted.
Note
Perform the delete recorded data again after
cancelling the protection.
(To Cancel Protection Page 207)
*1: This is not displayed unless the setting on the control device or the integrated control panel is performed.
(Consult with the management company or the company that installed the system.)
*2: This is displayed when a microSD memory card is inserted in the main unit.
*3: This is displayed when set to "Mobile device adapter setting: With connection" in "Connected device setting" of
installation setting, and the mobile device adapter (supports smartphone and tablet) (sold separately) is connected.
Initial setting Page
Intensity 3 Medium
Intensity 4 Medium
Intensity 5-lower High
Intensity 5-higher High
Intensity 6 or higher High
120
Erroneous Report Medium
Intensity 4 or lower Medium
Intensity 5-lower or higher High
Erroneous Report Medium
Not registered
121
—
to
122
—
On
123
—
124
to
125
—
93