When Checking The Power Consumption Volume - Panasonic Windea VGDT18143W Simple Manual

After Moving In/Before Moving Out
Be sure to perform the following operation after moving in or before moving out. If not, the previous
operating history may be viewed after new residents moving in, or information of the previous residents
may be left.
Note If the operation is carried out, news messages (only messages addressed to each unit) will be
deleted, and the user settings and video/audio recording data will be initialized.
1
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
● The Top Menu screen appears.
2
Touch
● The Setting screen appears.
3
Touch
●
The Service Setting screen appears.
●
If the screen does not appear,
touch to switch the page.
4
When you have moved in, touch
When you are moving out, touch
5
Touch
● If is touched, the operation will be
stopped and the screen will return to the
Setting screen.
● When is touched to end the
arrival and departure operation, the
screen on the right appears.
Touch to move to the Service
Setting screen (step 4 ).
70
About the Browser Function
(For base unit with browser function)
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
Press
Touch
Touch
Touch
Touch
any one

When Checking the Power Consumption Volume

(For base unit)
If you are using a residential distribution panel equipped with an over-currency alarm (data
output type) (5 level display type), you can check the the power consumption volume. (If you do
not know the equipment installed, check with the management company, building manager
room, etc.)
1
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
●
The Top Menu screen appears.
2
Touch
● The Overcurrent screen appears.
Note ● If you are using the D Series Measurement Box,
an electricity mark appears in the button.
( Page 20)
●
Depending on the equipment of the condominium
that you are living in, a selection screen may appear.
Touch .
Selection screen
●
If you are using the D Series Measurement Box,
the Eco Screen Selection screen appears.
Touch .
Eco Screen Selection screen
3
The power consumption volume
appears
Power consumption LCD display
volume (power consumption display)
0%
ー
1% 〜 20%
Green x 1 unit ON
20% 〜 40%
Green x 2 units ON
40% 〜 60%
Green x 3 units ON
60% 〜 80%
Green x 3 units ON, yellow ON
80% 〜 100%
Green x 3 units ON, yellow ON, orange ON
4
Press the OFF button after checking
●
It will return to the waiting state (nothing is displayed on the screen).
Note
The screen will automatically turn off when no operation is performed for 30 seconds.
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源 Press
火災 ガス 留守 警戒 戸締り
FIR E GAS NOTHOME S ET OPEN
POWER
Touch
Touch
Touch
When selected from the selection screen, "Information"
appears , when selected from the Eco Screen Selection
screen, "Select >" appears, when selected from
the selection screen and the Eco Screen Selection
screen, "Information > Select >" appears.
1 green power
consumption
● If the power consumption
display indicator
volume is 1% - 20％
71